Revision as of 16:21, 11 February 2019 (view source) JP (talk | contribs) (Created page with "==P2P Enabled (Dahua Device Only)== {| class="wikitable" !|Interface !|Image |- |WebUI |400px |- |SystemUI |file:2019-02-04_8-14-00.png|400px...")		Latest revision as of 20:33, 16 March 2020 (view source) JP (talk | contribs)
(15 intermediate revisions by 3 users not shown)
Line 1:		Line 1:
		+	=P2P Troubleshooting Checklist=
	==P2P Enabled (Dahua Device Only)==		==P2P Enabled (Dahua Device Only)==
	{| class="wikitable"		{| class="wikitable"
Line 102:		Line 103:
	*37777 for Dahua Device		*37777 for Dahua Device
	*35000 for FLIR device		*35000 for FLIR device
−	==Network Sniffer Packet Backup==
−	SystemUI only.
−	1. Prepare a USB (FAT32 format) and insert into device.	+	==Confirm All of the Above, Then Reboot==
		+	Reboot the recorder or camera after confirming all the above to be true
		+
		+	==Network Sniffer Packet Backup New GUI==
		+	This feature is available at the SystemUI only.
		+	===Prerequisites===
		+	*USB drive, formatted to FAT32
		+	*Dahua Recorder, connected to a network
		+	===Video Example===
		+
		+	<embedvideo service="youtube">https://youtu.be/0XQ53PXdp3o</embedvideo>
		+
		+	===Instructions===
		+	1. Insert a USB drive (FAT32 format) into the device. Most models of Dahua recorders will have a USB port on the front and rear of the unit, either can be used.
		+
		+	[[file:IMG_20190204_090313.jpg|500px]]
		+
		+	2. From the Main Menu go to Network
		+
		+	[[File:Network_Sniffer_Packet_Backup_-_1.jpg|500px]]
		+
		+	3. Click P2P
		+
		+	[[File:Network_Sniffer_Packet_Backup_-_2.jpg|500px]]
		+
		+	4. Click to disable the P2P feature
		+
		+	Click Apply
		+
		+	[[File:Network_Sniffer_Packet_Backup_-_3.jpg|500px]]
		+
		+	5. Return to the Main Menu
		+
		+	Click Operation
		+
		+	[[File:Network_Sniffer_Packet_Backup_-_4.jpg|500px]]
		+
		+	6. Click Network
		+
		+	[[File:Network_Sniffer_Packet_Backup_-_5.jpg|500px]]
		+
		+	7. Click Test
		+
		+	[[File:Network_Sniffer_Packet_Backup_-_6.jpg|500px]]
		+
		+	8. Confirm the USB drive is detected, under Device Name
		+
		+	Click 'Refresh' if you do not see the device in the drop-down box
		+
		+	[[File:Network_Sniffer_Packet_Backup_-_7.jpg|500px]]
		+
		+	9. Click 'Sniffer Packet Backup' next to the appropriate NIC card to begin the backup
		+
		+	[[File:Network_Sniffer_Packet_Backup_-_8.jpg|500px]]
		+
		+	10. The icon will change once the backup has begun
		+
		+	[[File:Network_Sniffer_Packet_Backup_-_9.jpg|500px]]
−	[[file:IMG_20190204_090313.jpg|400px]]	+	11. Return to the P2P menu
−	2. Go to P2P page, disable P2P, and click, "Apply".	+	From Main Menu click Network
−	[[file:2019-02-04_8-47-03.png|400px]]	+	[[File:Network_Sniffer_Packet_Backup_-_10.jpg|500px]]
−	3. Navigate to Main Menu -> Info -> Network -> Test	+	12. Click P2P
−	[[file:2019-02-04_8-19-09.png|400px]]	+	Click to enable the P2P service then click Apply
−	4. Click, "Refresh" You should now see, "USB Disk"	+	[[File:Network_Sniffer_Packet_Backup_-_11.jpg|500px]]
−	[[file:2019-02-04_8-49-15.png|400px]] -> [[file:2019-02-04_8-50-29.png|400px]]	+	13. Return to the Main Menu
−	5. Click, "Sniffer Packet Backup" on the appropriate NIC card to begin the backup.	+	Click Operation
−	[[file:2019-02-04_8-51-42.png|400px]]	+	[[File:Network_Sniffer_Packet_Backup_-_12.jpg|500px]]
−	4. Go to P2P page, enable P2P, and click, "Apply" Then you will get a .pcab file in USB.	+	14. Click the Pause button under 'Sniffer Packet Backup'
−	[[file:2019-02-04_8-52-58.png|400px]]	+	[[File:Network_Sniffer_Packet_Backup_-_13.jpg|500px]]
−	5. Navigate to Main Menu -> Info -> Network -> Test	+	15. Remove the USB drive from the recorder and connect it to a PC
−	[[file:2019-02-04_8-19-09.png|400px]]	+	[[File:Network_Sniffer_Packet_Backup_-_14.jpg|500px]]
−	6. Click the Pause button under, "Sniffer Packet Backup"	+	You should have one or several *.PCAP files. Please email these files to your Technical Support Representative for further analysis.
−	[[file:2019-02-04_8-55-00.png|400px]]
−	7. Remove USB drive from recorder, and connect USB drive to PC.
−	[[file:2019-02-04_8-56-54.png|400px]]
−	8. You should have one or several *.PCAP files. Please email these files to your Technical Support Representative for further analysis.	+	[[Category:FAQ]]
		+	[[Category:Tutorial]]
		+	[[Category:How To]]
		+	[[Category:Remote Access]]
		+	[[Category:P2P]]

---

Latest revision as of 20:33, 16 March 2020

P2P Troubleshooting Checklist

P2P Enabled (Dahua Device Only)

Interface	Image
WebUI
SystemUI

DHCP Enabled

Interface	Image
WebUI
SystemUI

DNS 1 = 8.8.8.8

Interface	Image
WebUI
SystemUI

DNS 2 = 8.8.4.4

Interface	Image
WebUI
SystemUI

Ping Test:Success

SystemUI only.

1. Navigate to Main Menu -> Info -> Network -> Test

2. Input, "8.8.8.8" for Destination IP.

3. Click, "Test"

4. Repeat these steps, replace, "8.8.8.8" with, "google.com"

Ping Test:Results-Success

Address	Status	Image
Google.com	Success
8.8.8.8	Success

Ping Test:Results-Fail

Address	Status	Image	Troubleshooting Tips
Google.com	Fail		Check network cable
8.8.8.8	Fail		Check network cable

Default TCP Port

• 37777 for Dahua Device
• 35000 for FLIR device

Confirm All of the Above, Then Reboot

Reboot the recorder or camera after confirming all the above to be true

Network Sniffer Packet Backup New GUI

This feature is available at the SystemUI only.

Prerequisites

• USB drive, formatted to FAT32
• Dahua Recorder, connected to a network

Video Example

Instructions

1. Insert a USB drive (FAT32 format) into the device. Most models of Dahua recorders will have a USB port on the front and rear of the unit, either can be used.

2. From the Main Menu go to Network

3. Click P2P

4. Click to disable the P2P feature

Click Apply

5. Return to the Main Menu

Click Operation

6. Click Network

7. Click Test

8. Confirm the USB drive is detected, under Device Name

Click 'Refresh' if you do not see the device in the drop-down box

9. Click 'Sniffer Packet Backup' next to the appropriate NIC card to begin the backup

10. The icon will change once the backup has begun

11. Return to the P2P menu

From Main Menu click Network

12. Click P2P

Click to enable the P2P service then click Apply

13. Return to the Main Menu

Click Operation

14. Click the Pause button under 'Sniffer Packet Backup'

15. Remove the USB drive from the recorder and connect it to a PC

You should have one or several *.PCAP files. Please email these files to your Technical Support Representative for further analysis.