Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "NVR/Basic Setup/Initialize Dahua IP Camera via FLIR NVR POE"
(Created page with "=Initialize Dahua IP Camera via FLIR NVR POE=") |
|||
(3 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
− | =Initialize Dahua IP Camera via FLIR NVR POE= | + | ==Initialize Dahua IP Camera via FLIR NVR POE== |
+ | ===Description=== | ||
+ | * How to Initialize a camera From the back of the NVR. | ||
+ | * Note: If your IP Camera is connected to the LAN, these instructions will not apply. Please see, "[[ConnectIPCtoNVR|How to Connect IP Camera to NVR]]" | ||
+ | |||
+ | ===Prerequisites=== | ||
+ | * ConfigTool 3.20<br/>[[ConfigTool|ConfigTool download]] | ||
+ | * Windows PC. | ||
+ | * Physical Connection to Camera Port on the back of The NVR. | ||
+ | ===Step by Step Instructions=== | ||
+ | |||
+ | 1. Launch ToolBox and run ConfigTool | ||
+ | |||
+ | [[File:dhcpp1.png|600px]] | ||
+ | |||
+ | 2. Click Initialize | ||
+ | |||
+ | [[File:dhcpp2.png|600px]] | ||
+ | |||
+ | 3. Select Device and Click Initialize | ||
+ | |||
+ | [[File:dhcpp3.png|600px]] | ||
+ | |||
+ | 4. Create Password and Enter Password Recovery Email. | ||
+ | |||
+ | [[File:dhcpp4.png|600px]] | ||
+ | |||
+ | 5. Select options for Easy4IP and update settings | ||
+ | |||
+ | [[File:dhcpp5.png|600px]] | ||
+ | |||
+ | 6. Your device should now be activated | ||
+ | |||
+ | [[File:dhcpp6.png|600px]] | ||
+ | |||
+ | 7. Select Edit and change IP to DHCP | ||
+ | |||
+ | [[File:dhcpp7.png|600px]] | ||
+ | [[File:dhcpp8.png|600px]] | ||
+ | |||
+ | 8. Your device should update to a usable IP address for your NVR | ||
+ | |||
+ | [[File:dhcpp9.png|600px]] |
Latest revision as of 16:12, 27 February 2019
Contents
Initialize Dahua IP Camera via FLIR NVR POE
Description
- How to Initialize a camera From the back of the NVR.
- Note: If your IP Camera is connected to the LAN, these instructions will not apply. Please see, "How to Connect IP Camera to NVR"
Prerequisites
- ConfigTool 3.20
ConfigTool download - Windows PC.
- Physical Connection to Camera Port on the back of The NVR.
Step by Step Instructions
1. Launch ToolBox and run ConfigTool
2. Click Initialize
3. Select Device and Click Initialize
4. Create Password and Enter Password Recovery Email.
5. Select options for Easy4IP and update settings
6. Your device should now be activated
7. Select Edit and change IP to DHCP
8. Your device should update to a usable IP address for your NVR