Difference between revisions of "NVR/Basic Setup/Connect WiFi Camera"
| (3 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
==How to Connect a WiFi Camera to NVR== | ==How to Connect a WiFi Camera to NVR== | ||
| + | ===Description=== | ||
| + | This shows you how to connect a wifi camera to NVR. | ||
| + | ===Prerequisites=== | ||
| + | *WiFi Camera | ||
| + | *NVR | ||
| + | |||
| + | ===Video Instructions=== | ||
| + | <embedvideo service="youtube">X</embedvideo> | ||
| + | |||
| + | ===Step by Step Instructions=== | ||
Note: These instructions only apply for WiFi NVRs and Cameras. | Note: These instructions only apply for WiFi NVRs and Cameras. | ||
| Line 63: | Line 73: | ||
11. Hit, "Save" | 11. Hit, "Save" | ||
| + | |||
| + | |||
| + | |||
| + | |||
| + | [[Category:IP_Camera]] | ||
| + | [[Category:NVR]] | ||
Latest revision as of 16:39, 11 October 2016
Contents
How to Connect a WiFi Camera to NVR
Description
This shows you how to connect a wifi camera to NVR.
Prerequisites
- WiFi Camera
- NVR
Video Instructions
Step by Step Instructions
Note: These instructions only apply for WiFi NVRs and Cameras.
1. Connect the NVR and IP Camera directly to your router or modem with a CAT5 cable.
2. Open the ConfigTool and locate your NVR and IP Camera.
3. Login to both using Internet Explorer.
IP Camera Login
NVR Login
4. On the NVR, go to Settings->Network->WiFi Device Manage
Be sure to note the SSID and Password.
5. On the IP Camera, go to Setup->Network->WiFi
6. Locate your NVR's SSID, and click once.
7. Input your NVR's SSID password, and click, "Connecting"
8. Go back to the NVR page, go to Settings->Network->WiFi Device Manage
Confirm that the camera is displaying on this page and note the IP address.
9. On the NVR page, go to Setting->Camera->Remote and click, "Manual Add"
10. Input the following:
- Channel: (Any)
- Manufacturer: Private
- IP Address: (Your IP Camera's IP Address)
- TCP Port: 37777
- User Name: admin
- Password: (Your IP Camera's password.) Default is, "admin"
- Remote Channel No. (Any)
- Decode Buffer: Default
11. Hit, "Save"
