Difference between revisions of "Software/Dahua Toolbox/VDPConfig/Modify System Settings"

(Created page with "==How To Modify System Settings In VDPConfig== ===Description=== This guide will show you how to modify the system settings of a device over a local network using VDPConfig...")
 
(Timing Settings)
 
(5 intermediate revisions by the same user not shown)
Line 3: Line 3:
 
===Description===
 
===Description===
 
This guide will show you how to modify the system settings of a device over a local network using VDPConfig
 
This guide will show you how to modify the system settings of a device over a local network using VDPConfig
 +
 +
System settings include:
 +
 +
*Time Settings (Set time, NTP, and DST settings)
 +
*Device Maintenance (Reboot and Factory Default)
 +
*Device Password (Modify and reset device password)
 +
*Alarm Configuration
  
 
===Prerequisites===
 
===Prerequisites===
Line 16: Line 23:
  
 
[[File:Upgrade_Firmware_-_VDPConfig_-_1.jpg|600px]]
 
[[File:Upgrade_Firmware_-_VDPConfig_-_1.jpg|600px]]
 +
 +
2. Click System Settings (screwdriver & wrench icon) on the left side of the screen
 +
 +
[[File:Modify_System_Settings_-_VDPConfig_-_1.jpg|600px]]
 +
 +
3. The Search Setting window will appear
 +
 +
 +
[[File:Modify_System_Settings_-_VDPConfig_-_2.jpg|600px]]
 +
 +
4. Adjust the search parameters to discover the device then click OK
 +
 +
[[File:Modify_System_Settings_-_VDPConfig_-_3.jpg|600PX]]
 +
 +
5. Discovered devices will appear in the device tree on the left
 +
 +
[[File:Modify_System_Settings_-_VDPConfig_-_4.jpg|600PX]]
 +
 +
6. Click the [[File:expand_device_tree.jpg]] (triangle) icon to expand the device list
 +
 +
[[File:Modify_System_Settings_-_VDPConfig_-_5.jpg|600PX]]
 +
 +
Check the box next to the device(s) you wish to modify
 +
 +
The message in the center of the screen will display how many devices are currently selected
 +
 +
====Timing Settings====
 +
[[File:Modify_System_Settings_-_VDPConfig_-_6.jpg]]
 +
 +
====Reboot/Restore====
 +
 +
====Device Password====
 +
 +
====AlarmConfig====

Latest revision as of 23:20, 10 June 2019

How To Modify System Settings In VDPConfig

Description

This guide will show you how to modify the system settings of a device over a local network using VDPConfig

System settings include:

  • Time Settings (Set time, NTP, and DST settings)
  • Device Maintenance (Reboot and Factory Default)
  • Device Password (Modify and reset device password)
  • Alarm Configuration

Prerequisites


Step by Step Instructions

1. Open DahuaToolbox and click Open next to VDPConfig


Upgrade Firmware - VDPConfig - 1.jpg

2. Click System Settings (screwdriver & wrench icon) on the left side of the screen

Modify System Settings - VDPConfig - 1.jpg

3. The Search Setting window will appear


Modify System Settings - VDPConfig - 2.jpg

4. Adjust the search parameters to discover the device then click OK

600PX

5. Discovered devices will appear in the device tree on the left

600PX

6. Click the Expand device tree.jpg (triangle) icon to expand the device list

600PX

Check the box next to the device(s) you wish to modify

The message in the center of the screen will display how many devices are currently selected

Timing Settings

Modify System Settings - VDPConfig - 6.jpg

Reboot/Restore

Device Password

AlarmConfig