Difference between revisions of "Template:LincX2PRO Motion Record WebUI New"

(Created page with "===Description=== This guide will show how to setup Motion Detection recording feature at the WebUI with NewGUI ===Prerequisites=== * Dahua recorder * LincX2PRO device * Linc...")
 
 
(One intermediate revision by the same user not shown)
Line 14: Line 14:
  
 
Click Alarm
 
Click Alarm
 +
 +
[[File:LincX2PRO_-_Setup_Motion_Detect_Record_-_WebUI_New_-_1.jpg|500px]]
 +
 +
2. Click Video Detection
 +
 +
[[File:LincX2PRO_-_Setup_Motion_Detect_Record_-_WebUI_New_-_2.jpg|500px]]
 +
 +
3. Under Motion Detect
 +
 +
Use the dropdown box to select the Channel of the LincX2PRO device
 +
 +
Check the box to enable Motion Detection
 +
 +
[[File:LincX2PRO_-_Setup_Motion_Detect_Record_-_WebUI_New_-_3.jpg|500px]]
 +
 +
4. Click Setting to adjust the region for motion detection
 +
 +
[[File:LincX2PRO_-_Setup_Motion_Detect_Record_-_WebUI_New_-_4.jpg|500px]]
 +
 +
5. Use the interface to create the region for motion detection (by default will be entire video frame)
 +
 +
Click inside the grid to adjust the region - Highlighted areas will detect for motion
 +
 +
Adjust any additional parameters such as Sensitivity or Threshold
 +
 +
[[File:LincX2PRO_-_Setup_Motion_Detect_Record_-_WebUI_New_-_5.jpg|500px]]
 +
 +
6. Click OK to save
 +
 +
[[File:LincX2PRO_-_Setup_Motion_Detect_Record_-_WebUI_New_-_6.jpg|500px]]
 +
 +
7. Configure the desired parameters for alarm triggers (actions when motion is detected)
 +
 +
[[File:LincX2PRO_-_Setup_Motion_Detect_Record_-_WebUI_New_-_8.jpg|500px]]
 +
 +
8. Click OK to save all settings
 +
 +
[[File:LincX2PRO_-_Setup_Motion_Detect_Record_-_WebUI_New_-_9.jpg|500px]]

Latest revision as of 20:03, 12 December 2019

Description

This guide will show how to setup Motion Detection recording feature at the WebUI with NewGUI

Prerequisites

Video Instructions

Step By Step Instructions

1. From the Main Menu

Click Alarm

LincX2PRO - Setup Motion Detect Record - WebUI New - 1.jpg

2. Click Video Detection

LincX2PRO - Setup Motion Detect Record - WebUI New - 2.jpg

3. Under Motion Detect

Use the dropdown box to select the Channel of the LincX2PRO device

Check the box to enable Motion Detection

LincX2PRO - Setup Motion Detect Record - WebUI New - 3.jpg

4. Click Setting to adjust the region for motion detection

LincX2PRO - Setup Motion Detect Record - WebUI New - 4.jpg

5. Use the interface to create the region for motion detection (by default will be entire video frame)

Click inside the grid to adjust the region - Highlighted areas will detect for motion

Adjust any additional parameters such as Sensitivity or Threshold

LincX2PRO - Setup Motion Detect Record - WebUI New - 5.jpg

6. Click OK to save

LincX2PRO - Setup Motion Detect Record - WebUI New - 6.jpg

7. Configure the desired parameters for alarm triggers (actions when motion is detected)

LincX2PRO - Setup Motion Detect Record - WebUI New - 8.jpg

8. Click OK to save all settings

LincX2PRO - Setup Motion Detect Record - WebUI New - 9.jpg