Difference between revisions of "Template:Kiosk WebUI Alarm Linkage"

 
(4 intermediate revisions by the same user not shown)
Line 3: Line 3:
 
</span><span class="left"></span></div>
 
</span><span class="left"></span></div>
 
<div class="mw-collapsible-content">
 
<div class="mw-collapsible-content">
 
+
{| class="wikitable"
*Alarm Linkage
+
!|Name
 +
!|Description
 +
|-
 +
!|Alarm Input
 +
|You cannot modify the value. Keep it default.
 +
|-
 +
!|Name
 +
|Enter a zone name.
 +
|-
 +
!|Alarm Input Type
 +
|
 +
There are two options: NO and NC.
 +
If alarm input type of the alarm device you purchased is NO, then you
 +
should select NO; otherwise you should select NC.
 +
|-
 +
!|Fire Link Enable
 +
|
 +
If fire link is enabled the access controller will output alarms when fire
 +
alarms are triggered. The alarm details will be displayed in the alarm
 +
log.<br />
 +
Alarm output and access link are NO by default if fire link is enabled.
 +
|-
 +
!|Alarm Output Enable
 +
|
 +
The relay can output alarm information (will be sent to the management
 +
platform) if the Alarm Output is enabled.
 +
|-
 +
!|Duration (Sec.)
 +
|The alarm duration, and the range is 1–300 seconds.
 +
|-
 +
!|Alarm Output Channel
 +
|
 +
You can select an alarm output channel according to the alarming
 +
device that you have installed. Each alarm device can be regarded as
 +
a channel.
 +
|-
 +
!|Access Link Enable
 +
|
 +
After the Access Link is enabled, the access controller will be normally
 +
on or normally closed when there are input alarm signals.
 +
|-
 +
!|Channel Type
 +
|There are two options: NO and NC.
 +
|-
 +
|}
 +
==<span style="color: white;">Alarm Linkage</span>==
 
[[file:Kiosk_Alarm_Linkage_Page.png|800px]]
 
[[file:Kiosk_Alarm_Linkage_Page.png|800px]]
*Alarm Log
+
==<span style="color: white;">Alarm Log</span>==
 
[[file:Kiosk_Alarm_Log_Page.png|800px]]
 
[[file:Kiosk_Alarm_Log_Page.png|800px]]
  
 
</div></div>
 
</div></div>

Latest revision as of 15:47, 23 June 2020

Kiosk Alarm Linkage Icon.png Alarm Linkage

Name Description
Alarm Input You cannot modify the value. Keep it default.
Name Enter a zone name.
Alarm Input Type

There are two options: NO and NC. If alarm input type of the alarm device you purchased is NO, then you should select NO; otherwise you should select NC.

Fire Link Enable

If fire link is enabled the access controller will output alarms when fire alarms are triggered. The alarm details will be displayed in the alarm log.
Alarm output and access link are NO by default if fire link is enabled.

Alarm Output Enable

The relay can output alarm information (will be sent to the management platform) if the Alarm Output is enabled.

Duration (Sec.) The alarm duration, and the range is 1–300 seconds.
Alarm Output Channel

You can select an alarm output channel according to the alarming device that you have installed. Each alarm device can be regarded as a channel.

Access Link Enable

After the Access Link is enabled, the access controller will be normally on or normally closed when there are input alarm signals.

Channel Type There are two options: NO and NC.

Alarm Linkage

Kiosk Alarm Linkage Page.png

Alarm Log

Kiosk Alarm Log Page.png