Difference between revisions of "Thermal/DH-TPC-HT2201/Instructions/Environmental Temperature Mode"

(Created page with "=How to Adjust Environmental Temperature Mode= ==Description== [Description goes here] ==Prerequisites== * [Prerequisites go here] ==Video Instructions== <embedvideo servic...")
 
 
(One intermediate revision by the same user not shown)
Line 2: Line 2:
  
 
==Description==
 
==Description==
[Description goes here]
+
This article covers how to change between Self-adaptive and Manual Environmental Temperature Modes on a DH-TPC-HT2201
  
 
==Prerequisites==
 
==Prerequisites==
* [Prerequisites go here]
+
* DH-TPC-HT2201
  
 
==Video Instructions==
 
==Video Instructions==
<embedvideo service="youtube">https://www.youtube.com/watch?v=test</embedvideo>
+
<embedvideo service="youtube">https://youtu.be/bMv2A54c0dg</embedvideo>
  
 
==Step by Step Instructions==
 
==Step by Step Instructions==
  
1 . [Steps go here]
+
1. Open the Main Menu by pressing the Up [[File:DH-TPC-HT2201_Up_Button.jpg|30px]] button
 +
 
 +
[[File:DH-TPC-HT2201_FormatSDCard4.PNG|400px]]
 +
 
 +
2. Using the Up [[File:DH-TPC-HT2201_Up_Button.jpg|30px]] and Down [[File:DH-TPC-HT2201_Down_Button.jpg|30px]] buttons, highlight "Temp Monitor".
 +
<br>Then press the power [[File:DH-TPC-HT2201_Power_Button.jpg|30px]] button to enter that menu
 +
 
 +
[[File:DH-TPC-HT2201_TempMonitorMode2.PNG|400px]]
 +
 
 +
3. Using the Up [[File:DH-TPC-HT2201_Up_Button.jpg|30px]] and Down [[File:DH-TPC-HT2201_Down_Button.jpg|30px]] buttons, highlight "EnvTemp Mode".
 +
<br>Then press the power [[File:DH-TPC-HT2201_Power_Button.jpg|30px]] button to enter that menu
 +
 
 +
[[File:DH-TPC-HT2201_EnvironmentalTemp2.PNG|400px]]
 +
 
 +
4. If you want to use the Handheld Temperature Monitoring Device's built in sensors to measure the ambient/environmental temperature in the room, leave the "Self-adaptive Mode" selected and stop following this guide.
 +
<br>You will see the automatically measured ambient/environmental temperature listed next to "Ambient Temp" at the bottom of this page.
 +
<br>If you want to manually set the ambient/environmental temperature for the room you are in, use the Up [[File:DH-TPC-HT2201_Up_Button.jpg|30px]] and Down [[File:DH-TPC-HT2201_Down_Button.jpg|30px]] buttons to highlight "Manual Mode".
 +
<br>Then press the power [[File:DH-TPC-HT2201_Power_Button.jpg|30px]] button
 +
 
 +
[[File:DH-TPC-HT2201_EnvironmentalTemp3.PNG|400px]]
 +
 
 +
5.  The first part of the temperature should already be highlighted on the left.
 +
<br>Press the power [[File:DH-TPC-HT2201_Power_Button.jpg|30px]] button to switch to editing mode for that part of the temperature setting.
 +
<br>Using the Up [[File:DH-TPC-HT2201_Up_Button.jpg|30px]] and Down [[File:DH-TPC-HT2201_Down_Button.jpg|30px]] buttons, adjust the first part of the temperature setting to the desired value.
 +
<br>Press the power [[File:DH-TPC-HT2201_Power_Button.jpg|30px]] button to save that value and go to the next part of the temperature setting
 +
 
 +
[[File:DH-TPC-HT2201_EnvironmentalTemp4.PNG|400px]]
 +
 
 +
6. Using the Up [[File:DH-TPC-HT2201_Up_Button.jpg|30px]] and Down [[File:DH-TPC-HT2201_Down_Button.jpg|30px]] buttons, adjust the second part of the temperature setting to the desired value.
 +
<br>Press the power [[File:DH-TPC-HT2201_Power_Button.jpg|30px]] button to save that value
 +
 
 +
[[File:DH-TPC-HT2201_EnvironmentalTemp5.PNG|400px]]
 +
 
 +
7. The "Yes" option should already be highlighted.
 +
<br>Press the power [[File:DH-TPC-HT2201_Power_Button.jpg|30px]] button to save the Environmental/Ambient Temperature as the temperature above
 +
 
 +
[[File:DH-TPC-HT2201_EnvironmentalTemp6.PNG|400px]]
 +
 
 +
8. You will now see Manual Mode enabled with a dot next to it and the "Ambient Temp" at the bottom will have the the manual temperature you just set
 +
 
 +
[[File:DH-TPC-HT2201_EnvironmentalTemp7.PNG|400px]]

Latest revision as of 23:27, 30 September 2020

How to Adjust Environmental Temperature Mode

Description

This article covers how to change between Self-adaptive and Manual Environmental Temperature Modes on a DH-TPC-HT2201

Prerequisites

  • DH-TPC-HT2201

Video Instructions

Step by Step Instructions

1. Open the Main Menu by pressing the Up DH-TPC-HT2201 Up Button.jpg button

DH-TPC-HT2201 FormatSDCard4.PNG

2. Using the Up DH-TPC-HT2201 Up Button.jpg and Down DH-TPC-HT2201 Down Button.jpg buttons, highlight "Temp Monitor".
Then press the power DH-TPC-HT2201 Power Button.jpg button to enter that menu

DH-TPC-HT2201 TempMonitorMode2.PNG

3. Using the Up DH-TPC-HT2201 Up Button.jpg and Down DH-TPC-HT2201 Down Button.jpg buttons, highlight "EnvTemp Mode".
Then press the power DH-TPC-HT2201 Power Button.jpg button to enter that menu

DH-TPC-HT2201 EnvironmentalTemp2.PNG

4. If you want to use the Handheld Temperature Monitoring Device's built in sensors to measure the ambient/environmental temperature in the room, leave the "Self-adaptive Mode" selected and stop following this guide.
You will see the automatically measured ambient/environmental temperature listed next to "Ambient Temp" at the bottom of this page.
If you want to manually set the ambient/environmental temperature for the room you are in, use the Up DH-TPC-HT2201 Up Button.jpg and Down DH-TPC-HT2201 Down Button.jpg buttons to highlight "Manual Mode".
Then press the power DH-TPC-HT2201 Power Button.jpg button

DH-TPC-HT2201 EnvironmentalTemp3.PNG

5. The first part of the temperature should already be highlighted on the left.
Press the power DH-TPC-HT2201 Power Button.jpg button to switch to editing mode for that part of the temperature setting.
Using the Up DH-TPC-HT2201 Up Button.jpg and Down DH-TPC-HT2201 Down Button.jpg buttons, adjust the first part of the temperature setting to the desired value.
Press the power DH-TPC-HT2201 Power Button.jpg button to save that value and go to the next part of the temperature setting

DH-TPC-HT2201 EnvironmentalTemp4.PNG

6. Using the Up DH-TPC-HT2201 Up Button.jpg and Down DH-TPC-HT2201 Down Button.jpg buttons, adjust the second part of the temperature setting to the desired value.
Press the power DH-TPC-HT2201 Power Button.jpg button to save that value

DH-TPC-HT2201 EnvironmentalTemp5.PNG

7. The "Yes" option should already be highlighted.
Press the power DH-TPC-HT2201 Power Button.jpg button to save the Environmental/Ambient Temperature as the temperature above

DH-TPC-HT2201 EnvironmentalTemp6.PNG

8. You will now see Manual Mode enabled with a dot next to it and the "Ambient Temp" at the bottom will have the the manual temperature you just set

DH-TPC-HT2201 EnvironmentalTemp7.PNG