Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Video Intercom/VTH Password Reset XML"
(Created page with "=How To Reset VTH Password via ConfigTool= ===Description=== This guide will show you how to reset the password of a Dahua VTH over a local network using Software/Dahua Too...") |
|||
(9 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
− | =How To Reset VTH Password via | + | =How To Reset VTH Password via Computer= |
===Description=== | ===Description=== | ||
This guide will show you how to reset the password of a Dahua VTH over a local network using [[Software/Dahua Toolbox/VDPConfig|VDP Config]]. | This guide will show you how to reset the password of a Dahua VTH over a local network using [[Software/Dahua Toolbox/VDPConfig|VDP Config]]. | ||
+ | |||
+ | {| class="wikitable" | ||
+ | |- | ||
+ | |'''PLEASE NOTE: These instructions can not be completed without assistance from Dahua Technical Support. Please contact Dahua Technical Support via one of the methods [https://dahuawiki.com/Support HERE]once you have completed Step 9''' | ||
+ | |- | ||
+ | |} | ||
===Prerequisites=== | ===Prerequisites=== | ||
Line 10: | Line 16: | ||
* [[Software/Dahua Toolbox/VDPConfig|VDP Config]] | * [[Software/Dahua Toolbox/VDPConfig|VDP Config]] | ||
+ | ===Video Instructions=== | ||
+ | <embedvideo service="youtube">https://youtu.be/2AgxaEHG80k</embedvideo> | ||
===Step by Step Instructions=== | ===Step by Step Instructions=== | ||
1. Open DahuaToolbox and click Open next to VDPConfig | 1. Open DahuaToolbox and click Open next to VDPConfig | ||
− | |||
[[File:Upgrade_Firmware_-_VDPConfig_-_1.jpg|600px]] | [[File:Upgrade_Firmware_-_VDPConfig_-_1.jpg|600px]] | ||
Line 20: | Line 27: | ||
[[File:Modify_IP_-_VDPConfig_-_1.jpg|600px]] | [[File:Modify_IP_-_VDPConfig_-_1.jpg|600px]] | ||
+ | |||
+ | 3. Select System Settings section | ||
+ | |||
+ | [[File:VTH Password Reset XML - 1.jpg|600px]] | ||
+ | |||
+ | 4. Click Device Password | ||
+ | |||
+ | [[File:VTH Password Reset XML - 2.jpg|600px]] | ||
+ | |||
+ | 5. Select the device(s) you wish to reset the password for on the left using the checkbox | ||
+ | |||
+ | [[File:VTH Password Reset XML - 3.jpg|600px]] | ||
+ | |||
+ | 6. Click '''Reset Password''' | ||
+ | |||
+ | [[File:VTH Password Reset XML - 4.jpg|600px]] | ||
+ | |||
+ | 7. Confirm the prompt | ||
+ | |||
+ | [[File:VTH Password Reset XML - 5.jpg|600px]] | ||
+ | |||
+ | 8. Use the dropdown box next to Reset Mode to select '''XML File''' | ||
+ | |||
+ | [[File:VTH Password Reset XML - 6.jpg|600px]] | ||
+ | |||
+ | The default Export Path will be displayed where the XML will be saved. | ||
+ | Click '''BrowsePath''' to modify this location. | ||
+ | |||
+ | Click '''Next''' to proceed | ||
+ | |||
+ | [[File:VTH Password Reset XML - 7.jpg|600px]] | ||
+ | |||
+ | A prompt will confirm a successful reset and generation of the XML file. | ||
+ | |||
+ | [[File:VTH Password Reset XML - 8.jpg|600px]] | ||
+ | |||
+ | {| class="wikitable" | ||
+ | |- | ||
+ | |'''PLEASE NOTE: The next steps require the assistance of Dahua Technical Support to complete the process. Please contact Dahua Technical Support via one of the methods once you have generated an XML file [https://dahuawiki.com/Support HERE]''' | ||
+ | |- | ||
+ | |} | ||
+ | |||
+ | 9. Navigate to the location where the XML file was exported to. default file name is ExportFile.xml | ||
+ | |||
+ | [[File:VTH Password Reset XML - 9.jpg|600px]] | ||
+ | |||
+ | 10. Send the exported xml file as an attachment to the email address: support_rpwd@dahuatech.com | ||
+ | |||
+ | Then 2 or 3 minutes later, you will receive an email with the attached XML file | ||
+ | |||
+ | [[File:VTH Password Reset XML - 10.jpg|600px]] | ||
+ | |||
+ | Save the results.XML file to the computer | ||
+ | |||
+ | 11. In VDPConfig at the Reset Password interface click Open | ||
+ | |||
+ | [[File:VTH Password Reset XML - 11.jpg|600px]] | ||
+ | |||
+ | 12. Select the results.xml file click Open | ||
+ | |||
+ | [[File:VTH Password Reset XML - 12.jpg|600px]] | ||
+ | |||
+ | 13. Click '''Next''' | ||
+ | |||
+ | [[File:VTH Password Reset XML - 13.jpg|600px]] | ||
+ | |||
+ | 14. Once the reset is successful it will prompt to create a new password for the device. | ||
+ | |||
+ | Enter the new password and again to confirm | ||
+ | |||
+ | Click '''Complete''' | ||
+ | |||
+ | [[File:VTH Password Reset XML - 14.jpg|600px]] | ||
+ | |||
+ | A green checkmark next to the device will confirm a successful password reset | ||
+ | |||
+ | [[File:VTH Password Reset XML - 15.jpg|600px]] |
Latest revision as of 21:46, 7 December 2020
Contents
How To Reset VTH Password via Computer
Description
This guide will show you how to reset the password of a Dahua VTH over a local network using VDP Config.
PLEASE NOTE: These instructions can not be completed without assistance from Dahua Technical Support. Please contact Dahua Technical Support via one of the methods HEREonce you have completed Step 9 |
Prerequisites
- Windows PC.
- Dahua video intercom device on the same LAN as the PC
- Dahua Toolbox
- VDP Config
Video Instructions
Step by Step Instructions
1. Open DahuaToolbox and click Open next to VDPConfig
2. Discover the device in VDPConfig - How To Discover A Device Using VDPConfig
3. Select System Settings section
4. Click Device Password
5. Select the device(s) you wish to reset the password for on the left using the checkbox
6. Click Reset Password
7. Confirm the prompt
8. Use the dropdown box next to Reset Mode to select XML File
The default Export Path will be displayed where the XML will be saved. Click BrowsePath to modify this location.
Click Next to proceed
A prompt will confirm a successful reset and generation of the XML file.
PLEASE NOTE: The next steps require the assistance of Dahua Technical Support to complete the process. Please contact Dahua Technical Support via one of the methods once you have generated an XML file HERE |
9. Navigate to the location where the XML file was exported to. default file name is ExportFile.xml
10. Send the exported xml file as an attachment to the email address: support_rpwd@dahuatech.com
Then 2 or 3 minutes later, you will receive an email with the attached XML file
Save the results.XML file to the computer
11. In VDPConfig at the Reset Password interface click Open
12. Select the results.xml file click Open
13. Click Next
14. Once the reset is successful it will prompt to create a new password for the device.
Enter the new password and again to confirm
Click Complete
A green checkmark next to the device will confirm a successful password reset