Difference between revisions of "Traffic/Troubleshoot/ITC237 Overexposure"
(→Overexposure At Night) |
(→Overexposure At Night) |
||
| Line 56: | Line 56: | ||
* The picture is dark in the daytime | * The picture is dark in the daytime | ||
| + | |||
| + | The possible reason is that the backlight causes the license plate to be dark under the shadow of the car body, and the car body and other scenes are bright | ||
| + | <gallery> | ||
| + | File:Enable_WDR.png| Enable WDR | ||
| + | </gallery> | ||
* Too much noise in the picture | * Too much noise in the picture | ||
Latest revision as of 22:04, 25 May 2021
Contents
ITC237 Image Issue Troubleshooting
Description
This guide will cover how to adjust/configure the camera settings to troubleshoot any overexposure image issues from the camera while in use.
Prerequisites
- ITC237 Camera
- Computer
Troubleshooting Image Issues
Camera Configuration is done in the camera's web ui
- Enter the IP of the camera into a browser
- Enter username/password
- Log in
Overexposure During the Day
Because the sun is hitting the license plate, it is directly reflected off the camera lens, causing the image to be overexposed.
There are several general strategies:
Try to avoid east-west direction in installation
Do not install the camera in the direction where the sun is just reflecting back. It is recommended to install the camera on the B side of the road, not the A side
Use automatic aperture lens
Enable WDR
Overexposure At Night
There are several kinds of common overexposure issues in the evening. Here are some general recommendations if you encounter issues with Overexposed Picture using the camera:
- The influence of the vehicle headlights, resulting in the inability to see the license plate
Enable WDR
Turn on the supplementary light of the camera
- Other vehicles have their license plates irradiated, resulting in overexposure
- Avoid headlight reflection angles
- Try to select parallel lanes for installation
- The camera's own light is too bright or the Angle is affected
Reduce the brightness level of the camera light itself
Reduce the number of lights on
Decrease the shutter and gain parameter values appropriately (generally default values are recommended)
- Reduce the brightness level of the camera light itself
- Reduce the number of lights on
- Decrease the shutter and gain parameter values appropriately (generally default values are recommended)
- The picture is dark in the daytime
The possible reason is that the backlight causes the license plate to be dark under the shadow of the car body, and the car body and other scenes are bright
Enable WDR
- Too much noise in the picture
