Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Access Control/How to Change IP Address to DHI-ASC2204C-S"
(→Common Issues) |
|||
(2 intermediate revisions by the same user not shown) | |||
Line 43: | Line 43: | ||
[[file:How to change IP Address to DHI-ASC2204C-S-7.png|900px]] | [[file:How to change IP Address to DHI-ASC2204C-S-7.png|900px]] | ||
− | + | ==Common Issues== | |
− | *If configtool fails to modify the password and give the | + | *If configtool fails to modify the password and give the error: Unknown error, code: 0x80000207 (from warning triangle icon), please modify the password under "Search Setting" to match the access control and try again. |
− | [[File: | + | [[File:Failed_to_Modify_IP_Address_in_Access_Control.png|400px]] |
Latest revision as of 17:55, 18 February 2022
Description
This article will go over changing the IP address to our DHI-ASC2204C-S
Due to security of the system you will need to connect a PC/laptop directly to the DHI-ASC2204C-S in order for this process to go smoothly
NOTE: DHI-ASC2204C-S's default Information is for older Firmware
IP: 192.168.1.108
username: admin
password: admin123
Prerequisites
- Laptop/PC directly connected to the DHI-ASC2204C-S
- Configtool
Step by Step Instructions
1. First make sure your laptop/PC is under the same subnet as the controller.
2. Open Configtool and click on Search Setting
3. Check Other Segment Search and enter the subnet the Controller is on. You will also need to enter the Controller's default credentials to be able to make any changes. Click on OK when finished
4. The device list will refresh, then click on Edit
5. Enter the desired IP then click on OK
6. You will see a green check mark when successfully changed. You will also hear an audible indicator from the controller.
7. You may now refresh to double check the IP changed
Common Issues
- If configtool fails to modify the password and give the error: Unknown error, code: 0x80000207 (from warning triangle icon), please modify the password under "Search Setting" to match the access control and try again.