Difference between revisions of "NVR/Recording Setup/RAID Setup"
(→Pre-Requisites) |
(→Prerequisites) |
||
| Line 1: | Line 1: | ||
==How to Setup RAID== | ==How to Setup RAID== | ||
| + | ===Description=== | ||
| + | RAID is a data storage virtualization technology that combines multiple physical disk drive components into a single logical unit for the purposes of data redundancy, performance improvement, or both. | ||
| + | |||
===Prerequisites=== | ===Prerequisites=== | ||
*An NVR that supports RAID | *An NVR that supports RAID | ||
Revision as of 15:57, 12 August 2016
Contents
How to Setup RAID
Description
RAID is a data storage virtualization technology that combines multiple physical disk drive components into a single logical unit for the purposes of data redundancy, performance improvement, or both.
Prerequisites
- An NVR that supports RAID
- 3 or more hard drives installed on your NVR
Step by Step Instructions to Setup RAID5
1. Login to your NVR from the web interface.
Error creating thumbnail: Unable to save thumbnail to destination
2. Go to Setup->Storage->RAID
Error creating thumbnail: Unable to save thumbnail to destination
Confirm that all installed hard drives are present.
3. Check each of the hard drives you wish to include in the array.
Error creating thumbnail: Unable to save thumbnail to destination
4. Click, "Create Manually"
Error creating thumbnail: Unable to save thumbnail to destination
5. Click, "OK" on the confirmation message, and wait several minutes.
Error creating thumbnail: Unable to save thumbnail to destination
6. Click, "Refresh" and you should see a single listing for the drives you added to the RAID along with a confirmation message.
Error creating thumbnail: Unable to save thumbnail to destination
