Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "CMS/DSS/Add Dahua NVR or DVR"
| Line 9: | Line 9: | ||
===Video Instructions=== | ===Video Instructions=== | ||
| − | <embedvideo service="youtube"> | + | <embedvideo service="youtube">https://youtu.be/W6JuODPdY9A</embedvideo> |
===Step by Step Instructions=== | ===Step by Step Instructions=== | ||
Revision as of 01:03, 2 September 2016
Contents
How to Add Dahua DVR or NVR
Description
This is a guide for How to Add Dahua DVR or NVR.
Prerequisites
- DSS
- Connected network
- NVR/DVR
Video Instructions
Step by Step Instructions
Step 1. From the main menu select ➞ General ➞ Device ➞ Device ➞ Encoder ➞ Add
Step 2. Enter IP address of NVR or DVR ➞ Enter User name and Password ➞ Name Device ➞ Select Device type ( NVR or DVR )
Step 3. Input Channel Amount ➞ Select Stream Type
Step 4. Name Device ➞ Input Serial Number ➞ Select OK
