Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "CMS/DSS/Add Encoder"
| Line 9: | Line 9: | ||
* Encoder | * Encoder | ||
===Video Instructions=== | ===Video Instructions=== | ||
| − | <embedvideo service="youtube"> | + | <embedvideo service="youtube">https://youtu.be/AEYMX1YARKM</embedvideo> |
===Step by Step Instructions=== | ===Step by Step Instructions=== | ||
Latest revision as of 23:21, 2 September 2016
Contents
How to Add an Encoder
Description
This is a guide for How to Add an Encoder.
Prerequisites
- DSS
- Connected network
- NVR/DVR
- Encoder
Video Instructions
Step by Step Instructions
Step 1. From the Main Menu Select the General Tab ➞ Device ➞ Device ➞ Encoder
Step 2. You may select Auto search or Add to manually input info.
- For Auto Search Select Auto Search ➞ Select Device to be added ➞ Select Add
Input Org. ➞ Choose Video Server ➞ Input User name and Password ➞ Select OK
- To Manually Add Select Add ➞ Select Video Server ➞ Input IP address of device ➞ Enter port number ➞ Enter User name and Password ➞ Select Organization encoder will belong to
- Select Getting Info ➞ Input Device Name ➞ Input Device SN ➞ Select Device Type ➞ Select Stream Type ➞ Select OK
