Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "USA/NVR/Ultra/DHI NVR6A08 64 4K"
(→Intelligent Features) |
(→Features) |
||
Line 89: | Line 89: | ||
* ONVIF Version 2.4 conformance | * ONVIF Version 2.4 conformance | ||
* Redundant power supply module adopted (DH-NVR608R-64-4K) | * Redundant power supply module adopted (DH-NVR608R-64-4K) | ||
+ | |||
+ | ===Compression=== | ||
+ | <gallery mode=nolines widths=65px> | ||
+ | file:H264_Icon.png|link=Products_with_H.264|[[Products_with_H.264|Products with H.264]] | ||
+ | </gallery> | ||
+ | |||
===Firmware=== | ===Firmware=== | ||
{{Template:NVRFirmwareToolkit}} | {{Template:NVRFirmwareToolkit}} |
Revision as of 22:01, 9 March 2017
Contents
DHI-NVR6A08-64-4K
Features
- Max 64 channel IP cameras connection
- Max 384Mbps incoming bandwidth
- Up to 12Mp resolution preview& playback
- 1 VGA+2 HDMI
- Support 8 hot-swap HDDs
- Support RAID 0/1/5/6/10/50/60
- Support N+M hot standby
- Support iSCSI to expand storage space
- Compatible with Dahua SDK and seamless integrated to other platforms
- Support Multi-brand network cameras: Dahua, Arecont Vision, AXIS, Bosch, Brickcom, Canon, CP Plus, Dynacolor, Honeywell, Panasonic, Pelco, Samsung, Sanyo, Sony, Videotec, Vivotek and etc.
- ONVIF Version 2.4 conformance
- Redundant power supply module adopted (DH-NVR608R-64-4K)
Compression
Firmware
You can update your device with the NVR Firmware Toolkit.
Firmware Update Instructions
- Instructions for Firmware Update via USB
- Instructions for Firmware Update via ConfigTool
- Instructions for Firmware Update via Internet Explorer
Firmware Update Download
1. Apply this update to your system first: Click Here To Download
2. Apply this update to your system second: Click Here To Download
Firmware Changelog
- Build Date: 7/14/2016
- English, Spanish, Frech optional, Default English, NTSC
Intelligent Features
Front Panel
NVR608 Series
Name |
Icon |
Function | |
Power button |
Power button, press this button for three seconds to boot up or shut down NVR. | ||
Number button |
0-9 |
Input Arabic number Switch channel
| |
Input number more than 10 |
-/-- |
If you want to input a number more than 10, please click this button and then input. | |
Shift |
£ |
In textbox, click this button to switch between numeral, English(Small/Capitalized),donation and etc. | |
Enable or disable tour. | |||
Up/ Down |
p、q |
Activate current control, modify setup, and then move up and down.
| |
Increase/decrease numeral.
| |||
Assistant function such as PTZ menu. | |||
Left/ Right |
t u |
Shift current activated control, and then move left and right. | |
When playback, click these buttons to control playback bar. | |||
ESC |
ESC |
Go to previous menu, or cancel current operation. | |
When playback, click it to restore real-time monitor mode. | |||
Enter |
ENTER |
Confirm current operation | |
Go to default button | |||
Go to menu | |||
Record |
REC |
Manually stop/start recording, working with direction keys or numeral keys to select the recording channel. | |
Slow play |
Multiple slow play speeds or normal playback. | ||
Assistant |
Fn |
One-window monitor mode, click this button to display assistant function: PTZ control and image color.
| |
Backspace function: in numeral control or text control, press it for 1.5 seconds to delete the previous character before the cursor. | |||
In motion detection setup, working with Fn and direction keys to realize setup.
| |||
In text mode, click it to switch between numeral, English character(small/capitalized) and etc. | |||
In HDD management interface, you can click it to switch HDD record information and other information (Menu prompt) | |||
Realize other special functions. | |||
Fast play |
8 |
Various fast speeds and normal playback. | |
Play previous |
t |
In playback mode, playback the previous video | |
Reverse/Pause |
|||
In normal playback or pause mode, click this button to reverse playback In reverse playback, click this button to pause playback. | |||
Play Next |
> |
In playback mode, playback the next video In menu setup, go to down ward of the dropdown list. | |
Play/Pause |
|
||
In normal playback click this button to pause playback In pause mode, click this button to resume playback. | |||
Window switch |
Mult |
Click it to switch one-window/multiple-window. | |
Shuttle(outer ring) |
In real-time monitor mode it works as left/right direction key. Playback mode, counter clockwise to forward and clock wise to backward. | ||
Jog(inner dial) |
Up/down direction key. Playback mode, turn the inner dial to realized frame by frame playback. (Only applies to some special versions.)
| ||
USB port
|
To connect USB storage device, USB mouse.
| ||
Remote control receiver |
IR |
It is to receive signal from the remote control. | |
Remote control indicator light |
ACT |
Remote control indicator light | |
Status indicator light |
Status |
The light is on if device operates properly. | |
Power indicator light |
POWER |
Power indicator light | |
Record light
|
1-16
|
It becomes on when system is recording.
| |
HDD abnormal status indictor light |
HDD |
It becomes on when there is no HDD, HDD error occurs, or HDD is full. |
Back Panel
NVR608 Series
The NVR608 series rear panel is shown as below.
Port Name |
Function | |
Power switch |
/ |
Power on-off button |
Power input port |
/ |
Input AC 100~240V. |
MIC IN |
Audio input port |
Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup. |
MIC OUT |
Audio output port |
Audio output port. It is to output the analog audio signal to the devices such as the sound box.
|
VIEDEO OUT |
Video output port |
CVBS output |
1~16 |
Alarm input port 1~16 |
|
GND |
Alarm input ground port. | |
NO1~NO5 |
Alarm output port 1~5 |
|
C1~C5 | ||
NC5 | ||
A |
RS-485 communication port |
RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ. |
B |
RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ. | |
CTRL 12V |
/ |
Controller 12V power output. It is to control the on-off alarm relay output. It can be used to control the device alarm output. At the same time, it can also be used as the power input source of some devices such as the alarm detector. |
+12V |
/ |
+12V power output port. It can provide the power to some peripheral devices such as the camera or the alarm device. Please note the supplying power shall be below 1A. |
Network port |
10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable. | |
eSATA |
eSATA port |
External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD. |
USB2.0 port |
USB2.0 port. Connect to mouse, USB storage device, USB burner and etc. | |
RS-232 |
RS232 debug COM. |
It is for general COM debug to configure IP address or transfer transparent COM data. |
HDMI |
High Definition Media Interface |
High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.3. The two HDMI ports to output video from different video sources. |
VGA |
VGA video output port |
VGA video output port. Output analog video signal. It can connect to the monitor to view analog video. |
Specifications
Model | DHI-NVR6A08-64-4K | DHI-NVR6A08R-64-4K |
System | ||
Main Processor | Intel Processors | |
Operating System | LINUX | |
Video& Audio | ||
IP Camera Input | 64 channel | |
Two-way Talk | 1channel Input, 1channel Output, RCA | |
Display | ||
Interface | 2 HDMI (up to 3840×2160), 1 VGA | |
Resolution | 3840×2160, 1920×1080, 1280×1024, 1280×720, 1024×768 | |
Multi-screen Display | The 1st screen: 1/4/8/9/16/25/36 | |
The 2nd screen: 1/4/8/9/16 | ||
OSD | Camera title, Time, Video loss, Camera lock, Motion detection, Recording | |
Recording | ||
Compression | H.264/MJPEG | |
Resolution | 12Mp, 8Mp, 6Mp, 5Mp, 3Mp, 1080P, 1.3Mp, 720P & etc. | |
Record Rate | 256Mbps | |
Bit Rate | 1~ 20Mbps | |
Record Mode | Manual, Schedule(Regular(Continuous), MD(Video detection: Motion detection, Camera blank, Video loss), Alarm), Stop | |
Record Interval | 1~120 min (default: 60 min), Pre-record: 1~30 sec, Post-record: 10~300 sec | |
Video Detection & Alarm | ||
Trigger Events | Recording, PTZ, Tour, Alarm out, Video Push, Email, FTP, Snapshot, Buzzer & Screen tips | |
Video Detection | Motion Detection, MD Zones: 396(22×18), Video Loss & Camera Blank | |
Alarm Input | 16ch, low level effective, green terminal interface | |
Relay Output | 8ch, Relay contact(1A@24VDC), NO/NC programmable, green terminal interface | |
Playback & Backup | ||
Playback | 128Mbps in Raid 5 mode 64Mbps in single HDD mode | |
Search Mode | Time/Date, Alarm, MD & Exact search (accurate to second) | |
Playback Function | Play, Pause, Stop, Rewind, Fast play, Slow play, Next file, Previous file, Next camera, Previous camera, Full screen, Repeat, Shuffle, Backup selection, Digital zoom | |
Backup Mode | USB Device/Network/Internal SATA burner/eSATA Device | |
Network | ||
Interface | 2 RJ-45 ports (10/100/1000Mbps) | |
Ethernet Port | 2 Ethernet ports joint working or 2 independent 1000Mbps Ethernet ports | |
Network Function | HTTP, TCP/IP, IPv4/IPv6, UPnP, RTSP, UDP, SMTP, NTP, DHCP, DNS, IP Filter, PPPoE, DDNS, FTP, Alarm Server, IP Search(Support Dahua IP camera, DVR, NVS and etc.) | |
Max. User Access | 128 users | |
Smart Phone | iPhone, iPad, Android | |
Storage | ||
Internal HDD | 8 SATA III ports, up to 48TB | |
HDD Mode | Single, Raid 0/1/5/6/10/50/60 (Support global HDD hot-spare) | |
Auxiliary Interface | ||
USB | 4 USB ports(3 USB2.0, 1 USB3.0) | |
eSATA | 1 eSATA port | |
RS232 | 1 port, For PC communication& keyboard | |
RS485 | 1 port, For PTZ control | |
General | ||
Power Supply | AC110V~240V, 50~60Hz | AC100V~240V, 50~60Hz, Redundant |
Power Consumption | ||
Working Environment | -10°C~+55°C/10%~90%RH/86~106kpa | |
Dimension(W×D×H) | 486mm(with ears)×454.9mm ×91mm | 486mm(with ears)×471.8mm ×91mm |
Weight | 9kg (without HDD) | |
Installation | 19” Rack-mounted |