Difference between revisions of "Frequently Asked Questions"
(→NVR) |
(→NVR) |
||
| Line 3: | Line 3: | ||
{| class="wikitable" | {| class="wikitable" | ||
!colspan="8"|NVR FAQ | !colspan="8"|NVR FAQ | ||
| + | |- | ||
| + | !Problem | ||
| + | !Solution | ||
|- | |- | ||
!rowspan="8"|NVR will not boot. | !rowspan="8"|NVR will not boot. | ||
Revision as of 16:04, 5 May 2017
Frequently Asked Questions
NVR
| NVR FAQ | |||||||
|---|---|---|---|---|---|---|---|
| Problem | Solution | ||||||
| NVR will not boot. | Input power is not correct. | ||||||
| Power connection is not correct. | |||||||
| Power switch button is damaged. | |||||||
| Program upgrade is wrong. | |||||||
| HDD malfunction or something wrong with HDD ribbon. | |||||||
| Seagate DB35.1, DB35.2，SV35 or Maxtor 17-g has compatibility problem. Please upgrade to the latest version to solve this problem. | |||||||
| Front panel error. | |||||||
| Main board is damaged. | |||||||
| NVR often automatically shuts down or stops running. | Input voltage is not stable or it is too low. | ||||||
| HDD malfunction or something wrong wit the ribbon. | |||||||
| Button power is not enough. | |||||||
| Front video signal is not stable. | |||||||
| Working environment is too harsh, too much dust. | |||||||
| Hardware malfunction. | |||||||
| System is unable to detect hard drive. | HDD is broken. | ||||||
| HDD ribbon is damaged. | |||||||
| HDD cable connection is loose. | |||||||
| Main board SATA port is broken. | |||||||
| Video loss from 1, multiple, or all channels. | |||||||
| Program is not compatible. Please upgrade to the latest version. | |||||||
| Brightness is 0. Please restore factory default setup. | |||||||
| Check your screen saver. | |||||||
| NVR hardware malfunctions. | |||||||
| I can not search local records. | |||||||
| HDD ribbon is damaged. | |||||||
| HDD is broken. | |||||||
| Upgraded program is not compatible. | |||||||
| The recorded file has been overwritten. | |||||||
| Record function has been disabled | |||||||
