Difference between revisions of "NVR/Install HDD"
(Created page with "==How to install HDD== (Placeholder)") |
(→How to install HDD) |
||
| Line 1: | Line 1: | ||
==How to install HDD== | ==How to install HDD== | ||
| − | ( | + | |
| + | Loosen the screws of the upper cover and side panel. | ||
| + | The following HDD installation is based on the following NVR series. | ||
| + | NVR42/42-P/42-8P/72/72-8P/42-4K/42-8P-4K Series | ||
| + | The images came from NVR 72-8P series. | ||
| + | |||
| + | 1. Loosen the screws of the upper cover and side panel. | ||
| + | |||
| + | [file:HDDInstallation1.png] | ||
| + | |||
| + | 2. Fix four screws in the HDD (Turn just three rounds). | ||
| + | [file:HDDInstallation2.png] | ||
| + | |||
| + | 3. Place the HDD in accordance with the four holes in the bottom. | ||
| + | |||
| + | [file:HDDInstallation3.png] | ||
| + | |||
| + | 4. Turn the device upside down and then turn the screws in firmly. | ||
| + | |||
| + | [file:HDDInstallation4.png] | ||
| + | |||
| + | 5. Fix the HDD firmly. | ||
| + | |||
| + | [file:HDDInstallation5.png] | ||
| + | |||
| + | 6. Connect the HDD cable and power cable. | ||
| + | |||
| + | [file:HDDInstallation6.png] | ||
| + | |||
| + | 7. Put the cover in accordance with the clip and then place the upper cover back. | ||
| + | |||
| + | [file:HDDInstallation7.png] | ||
| + | |||
| + | 8. Secure the screws in the rear panel and the side panel. | ||
| + | |||
| + | [file:HDDInstallation8.png] | ||
Revision as of 18:31, 7 December 2015
How to install HDD
Loosen the screws of the upper cover and side panel. The following HDD installation is based on the following NVR series. NVR42/42-P/42-8P/72/72-8P/42-4K/42-8P-4K Series The images came from NVR 72-8P series.
1. Loosen the screws of the upper cover and side panel.
[file:HDDInstallation1.png]
2. Fix four screws in the HDD (Turn just three rounds). [file:HDDInstallation2.png]
3. Place the HDD in accordance with the four holes in the bottom.
[file:HDDInstallation3.png]
4. Turn the device upside down and then turn the screws in firmly.
[file:HDDInstallation4.png]
5. Fix the HDD firmly.
[file:HDDInstallation5.png]
6. Connect the HDD cable and power cable.
[file:HDDInstallation6.png]
7. Put the cover in accordance with the clip and then place the upper cover back.
[file:HDDInstallation7.png]
8. Secure the screws in the rear panel and the side panel.
[file:HDDInstallation8.png]
