Difference between revisions of "NVR/Install HDD"
(→How to install HDD) |
(→How to install HDD) |
||
| Line 1: | Line 1: | ||
==How to install HDD== | ==How to install HDD== | ||
| − | + | ||
| − | The following HDD installation is based on the following NVR series | + | The following HDD installation is based on the following NVR series: |
| + | |||
NVR42/42-P/42-8P/72/72-8P/42-4K/42-8P-4K Series | NVR42/42-P/42-8P/72/72-8P/42-4K/42-8P-4K Series | ||
| + | |||
The images came from NVR 72-8P series. | The images came from NVR 72-8P series. | ||
| + | |||
1. Loosen the screws of the upper cover and side panel. | 1. Loosen the screws of the upper cover and side panel. | ||
Revision as of 18:36, 7 December 2015
How to install HDD
The following HDD installation is based on the following NVR series:
NVR42/42-P/42-8P/72/72-8P/42-4K/42-8P-4K Series
The images came from NVR 72-8P series.
1. Loosen the screws of the upper cover and side panel.
Error creating thumbnail: Unable to save thumbnail to destination
2. Fix four screws in the HDD (Turn just three rounds).
Error creating thumbnail: Unable to save thumbnail to destination
3. Place the HDD in accordance with the four holes in the bottom.
Error creating thumbnail: Unable to save thumbnail to destination
4. Turn the device upside down and then turn the screws in firmly.
Error creating thumbnail: Unable to save thumbnail to destination
5. Fix the HDD firmly.
Error creating thumbnail: Unable to save thumbnail to destination
6. Connect the HDD cable and power cable.
Error creating thumbnail: Unable to save thumbnail to destination
7. Put the cover in accordance with the clip and then place the upper cover back.
Error creating thumbnail: Unable to save thumbnail to destination
8. Secure the screws in the rear panel and the side panel.
Error creating thumbnail: Unable to save thumbnail to destination
