Difference between revisions of "3rd Party VMS/Control4/Add Dahua IP Camera to Control4"
(→Prerequisites) |
(→Prerequisites) |
||
Line 5: | Line 5: | ||
==Prerequisites== | ==Prerequisites== | ||
*Control4 Composer | *Control4 Composer | ||
− | *[https://dahuawiki.com/images/Firmware/Control4/3rd_Party_Driver/dahua_camera_nvr_fixed.c4z Control4 Driver for Dahua | + | *[https://dahuawiki.com/images/Firmware/Control4/3rd_Party_Driver/dahua_camera_nvr_fixed.c4z Control4 Driver for Dahua IP Cameras] |
*https://my.control4.com/ Account | *https://my.control4.com/ Account | ||
*Dahua Device configured for Static IP or DHCP Reservation | *Dahua Device configured for Static IP or DHCP Reservation |
Revision as of 14:51, 22 April 2019
Contents
How to Add Dahua IP Camera to Control4
Description
Using this driver allows a Control4 dealer to add an icon in the watch menu. This will enable the Control4 System to use the Monitor-Out/HDMI/VGA connector to integrate Dahua devices.
Prerequisites
- Control4 Composer
- Control4 Driver for Dahua IP Cameras
- https://my.control4.com/ Account
- Dahua Device configured for Static IP or DHCP Reservation
- Control4 Firmware for Dahua Device
Video Instructions
Step by Step Instructions
1. Install driver. 800x800px
2. Add camera
3. Configure