Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "ConfigTool/Template Setup"
(→Description) |
(→Description) |
||
| Line 4: | Line 4: | ||
*Creating the template: Back up or save the video and encoding parameters for the device. | *Creating the template: Back up or save the video and encoding parameters for the device. | ||
*Applying the template: Restore or batch configuring the video and encoding parameters for the device. | *Applying the template: Restore or batch configuring the video and encoding parameters for the device. | ||
| + | |||
| + | For this example we will be using the following: | ||
| + | *2x N41BK22s on Firmware Version: 2.622.0000000.31.R Build Date: 2018-08-13 | ||
| + | *ConfigTool Version V4.011.00GP001.0 from the [https://dahuawiki.com/images/Software/Dahua_Toolbox/General_ToolBox_Eng_Extranet_Install_V1_008_0000000_5_R_20180524.zip Dahua ToolBox] | ||
==Prerequisites== | ==Prerequisites== | ||
Revision as of 15:07, 25 September 2019
Contents
ConfigTool Template Setup
Description
You can create and apply the templates.
- Creating the template: Back up or save the video and encoding parameters for the device.
- Applying the template: Restore or batch configuring the video and encoding parameters for the device.
For this example we will be using the following:
- 2x N41BK22s on Firmware Version: 2.622.0000000.31.R Build Date: 2018-08-13
- ConfigTool Version V4.011.00GP001.0 from the Dahua ToolBox
Prerequisites
Template Examples
IPC Template
PTZ Template
DVR Template
NVR Template
Video Instructions
Step by Step Instructions
1. 800x800px
