Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Video Intercom/SIP 2.0/Stand Alone VTH and VTO Setup"
| Line 2: | Line 2: | ||
==Description== | ==Description== | ||
This guide will show how to setup a VTO and VTH device on a network | This guide will show how to setup a VTO and VTH device on a network | ||
| + | |||
| + | This guide will use a VTO2000A and VTH1510 | ||
| + | |||
| + | The setup will be similar for | ||
==Prerequisites== | ==Prerequisites== | ||
* VTO and VTH initialized and set up on network | * VTO and VTH initialized and set up on network | ||
| − | * | + | * VTO and VTH log in information |
* | * | ||
==Video Instructions== | ==Video Instructions== | ||
Revision as of 22:22, 5 November 2019
Contents
Stand Alone VTH and VTO Setup
Description
This guide will show how to setup a VTO and VTH device on a network
This guide will use a VTO2000A and VTH1510
The setup will be similar for
Prerequisites
- VTO and VTH initialized and set up on network
- VTO and VTH log in information
Video Instructions
Step by Step Instructions
1. 800x800px
