Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "LincX2PRO/Recover Device via SD Card Firmware Flash"
(→Part 2:Insert SD-Card & Flash) |
(→Part 4:Setup Device with Mobile App) |
||
| Line 17: | Line 17: | ||
===Part 4:Setup Device with Mobile App=== | ===Part 4:Setup Device with Mobile App=== | ||
| + | '''NOTE:'''Device should be showing a flashing green light before proceeding with this step | ||
==Step by Step Instructions== | ==Step by Step Instructions== | ||
1. | 1. | ||
[[File:YourProcess1.jpg|800x800px]] | [[File:YourProcess1.jpg|800x800px]] | ||
Revision as of 18:10, 11 December 2019
Contents
Recover Device via SD Card Firmware Flash
Description
Prerequisites
- LincX2PRO Device
- SD-Card
- Current LincX2PRO Device Firmware
- PC
- SD-Card Reader
Video Instructions
Part 1:Prepare SD-Card
Part 2:Insert SD-Card & Flash
Part 3:Remove SD Card & Reset to Defaults
Part 4:Setup Device with Mobile App
NOTE:Device should be showing a flashing green light before proceeding with this step
Step by Step Instructions
1. 800x800px
