Difference between revisions of "LincX2PRO/Recover Device via SD Card Firmware Flash"
(→Part 3:Remove SD Card & Reset to Defaults) |
(→Step by Step Instructions) |
||
Line 20: | Line 20: | ||
===Part 4:Setup Device with Mobile App=== | ===Part 4:Setup Device with Mobile App=== | ||
'''NOTE:'''Device should be showing a flashing green light before proceeding with this step | '''NOTE:'''Device should be showing a flashing green light before proceeding with this step | ||
− | |||
− | |||
− | |||
− |
Revision as of 18:14, 11 December 2019
Contents
Recover Device via SD Card Firmware Flash
Description
Prerequisites
- LincX2PRO Device
- SD-Card
- Current LincX2PRO Device Firmware
- PC
- SD-Card Reader
Video Instructions
Part 1:Prepare SD-Card
Part 2:Insert SD-Card & Flash
Part 3:Remove SD Card & Reset to Defaults
NOTE:Device should be showing a solid green light before proceeding with this step
Part 4:Setup Device with Mobile App
NOTE:Device should be showing a flashing green light before proceeding with this step