Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Thermal/Temperature Monitoring/Physical Setup"
Line 47: | Line 47: | ||
If you're using an NVR, follow the [[Thermal/Temperature Monitoring/NVR Setup|steps to set up Thermal Monitoring solution with NVR]] | If you're using an NVR, follow the [[Thermal/Temperature Monitoring/NVR Setup|steps to set up Thermal Monitoring solution with NVR]] | ||
− | |||
− |
Revision as of 23:49, 23 April 2020
Contents
Temperature Monitoring Solution Physical Setup
Error creating thumbnail: File missing
Description
This guide will show the proper physical arrangement/setup of the devices for the Temperature Monitoring Solution
Video Instructions
Step by Step Instructions
Mounting Adapter Plates
The mounting brackets/plates must be installed to both the camera and black body device
To attach the tripod:
Suggested Physical Layout
JQ-D70Z Black body Setup
Next Step
Physical setup is now complete you can continue with setup and programming:
If you're using an NVR, follow the steps to set up Thermal Monitoring solution with NVR