Revision as of 23:21, 23 June 2020

Add DHI-ASI7213X-T1 to DHI-NVR5216-16P-I

Description

These instructions will show how to add the DHI-ASI7213X-T1 to the DHI-NVR5216-16P-I and setup the device for Live Preview - AI Mode

Prerequisites

• DHI-ASI7213X-T1 set up and configured on network
• DHI-NVR5216-16P-I with latest firmware V4.000.10BE000.0.R.20200513

Video Instructions

Step by Step Instructions

Add DHI-ASI7213X-T1 to NVR

1. Enter the IP address of the NVR into Internet Explorer

Enter the username and password

Click Login

2. Click Management

3. Select Camera

4. Click Manual Add

5. Enter the IP Address of the device

Enter the admin password

Click OK

The device will appear in the list

Click Refresh until the Status shows Green / Connected

Configure Storage

The NVR Storage settings must be configured for the channel the DHI-ASI7213X-T1 is added as.

From the Main Menu click Management > Storage

Click Schedule

Use the dropdown box to select the channel the device is added to

Click Setting

Check to enable all days

Select the event types shown

Click OK

Click OK to save

Click Snapshot tab

Click Setting

Check to enable all days

Select the event types shown

Click OK

Click OK to save

Click Record

Under Snapshot

Make sure Open is selected

Click OK to save

Configure AI

1. From the Main Menu

Click AI

2. Click Parameters > Face Recognition

3. Check the box to enable

Click OK

4. Click Door AccessControl

This menu will display all options for configuring events from the DHI-ASI7213X-T1

Click Setting

Enable General Alarm

Click More Setting

TO find options for Buzzer, Email Notifications, and Log

Click OK to save