Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Software/Dahua Toolbox/VDPConfig/Adjust Time"
(Created page with "==How To Adjust Time Using VDPConfig== ===Description=== This guide will show you how to adjust the time a device over a local network using VDPConfig. ===Prerequisites=== *...") |
|||
| Line 10: | Line 10: | ||
* [[Software/Dahua Toolbox/VDPConfig|VDP Config]] | * [[Software/Dahua Toolbox/VDPConfig|VDP Config]] | ||
| + | ===Video Instructions=== | ||
| + | <embedvideo service="youtube">https://youtu.be/blXThXdBJyc</embedvideo> | ||
===Step by Step Instructions=== | ===Step by Step Instructions=== | ||
Revision as of 23:30, 7 December 2020
Contents
How To Adjust Time Using VDPConfig
Description
This guide will show you how to adjust the time a device over a local network using VDPConfig.
Prerequisites
- Windows PC.
- Dahua video intercom device on the same LAN as the PC
- Dahua Toolbox
- VDP Config
Video Instructions
Step by Step Instructions
1. Open DahuaToolbox and click Open next to VDPConfig
2. Discover the device in VDPConfig - How To Discover A Device Using VDPConfig
3. Check the box next to the device in the list
To open network settings:
Click the Pencil icon under the Operate
OR
Click Modify IP towards the bottom of the window
