Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "EventAbnormality"
(Created page with "===Abnormality=== Abnormality includes: * No SD Card * Capacity Warning * SD Card Error * Disconnection * IP Conflict * Unauthorized Access Note:Only devices with SD card f...") |
|||
| Line 1: | Line 1: | ||
===Abnormality=== | ===Abnormality=== | ||
| − | |||
Abnormality includes: | Abnormality includes: | ||
| Line 15: | Line 14: | ||
* Capacity warning | * Capacity warning | ||
* SD card error. | * SD card error. | ||
| + | |||
[[file:IPCEventSDCard.jpg|800px]] | [[file:IPCEventSDCard.jpg|800px]] | ||
| + | |||
| + | {| class="wikitable" width="544" | ||
| + | |- | ||
| + | | width="80"| | ||
| + | Parameter | ||
| + | |||
| + | | width="464"| | ||
| + | Function | ||
| + | |||
| + | |- | ||
| + | | width="80"| | ||
| + | Enable | ||
| + | |||
| + | | width="464"| | ||
| + | Check to alarm when SD card is abnormal. | ||
| + | |||
| + | |- | ||
| + | | width="80"| | ||
| + | Relay-out | ||
| + | |||
| + | | width="464"| | ||
| + | Check to enable relay-out alarm. | ||
| + | |||
| + | |- | ||
| + | | width="80"| | ||
| + | Relay out delay | ||
| + | |||
| + | | width="464"| | ||
| + | The alarm output can delay for the specified time after alarm stops. The value ranges from 10s to 300s. | ||
| + | |||
| + | Note: | ||
| + | |||
| + | No SD card, capacity warning, SD card error, relay-out delay all start from alarm occurs. | ||
| + | |||
| + | |- | ||
| + | | width="80"| | ||
| + | Send email | ||
| + | |||
| + | | width="464"| | ||
| + | After you enabled this function, the system can send out email to alarm the specified user. | ||
| + | |||
| + | This function is invalid when network is offline or IP conflict occurs. | ||
| + | |||
| + | |- | ||
| + | | width="80"| | ||
| + | SD Card Capacity Limit | ||
| + | |||
| + | | width="464"| | ||
| + | User can set SD card capacity that is left free. When SD card space left is smaller than this limit, alarm occurs. | ||
| + | |||
| + | |} | ||
Revision as of 20:02, 14 October 2015
Abnormality
Abnormality includes:
- No SD Card
- Capacity Warning
- SD Card Error
- Disconnection
- IP Conflict
- Unauthorized Access
Note:Only devices with SD card function has the following statuses:
- No SD card
- Capacity warning
- SD card error.
|
Parameter |
Function |
|
Enable |
Check to alarm when SD card is abnormal. |
|
Relay-out |
Check to enable relay-out alarm. |
|
Relay out delay |
The alarm output can delay for the specified time after alarm stops. The value ranges from 10s to 300s. Note: No SD card, capacity warning, SD card error, relay-out delay all start from alarm occurs. |
|
Send email |
After you enabled this function, the system can send out email to alarm the specified user. This function is invalid when network is offline or IP conflict occurs. |
|
SD Card Capacity Limit |
User can set SD card capacity that is left free. When SD card space left is smaller than this limit, alarm occurs. |
