Difference between revisions of "USA/NVR/Ultra/DHI NVR6A08 32 4K"

Icon

Name

Function

STATUS

Status indicator light

The blue light is on when the device is malfunction.

HDD

HDD status indicator

light

The blue light is on when the HDD is malfunction.

NET

Network status indicator light

The blue light is on when the network connection is abnormal.

POWER

Power status indicator light

The blue light is on when the power connection is OK.

USB2.0 port

Connect to peripheral USB 2.0 storage device, mouse, burner and etc.

Port Name

Function

Power switch

/

Power on-off button

Power input port

/

Input AC 100~240V.

MIC IN

Audio input port

Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup.

MIC OUT

Audio output port

Audio output port. It is to output the analog audio signal to the devices such as the sound box.

• Bidirectional talk output.
• Audio output on 1-window video monitor.
• Audio output on 1-window video playback.

VIEDEO  OUT

Video output port

CVBS output

1～16

Alarm input port 1～16

• There are four groups. The first group is from port 1 to port 4, the second group is from port 5 to port 8, the third group is from 9 to 12, and the fourth group is from 13 to 16. They are to receive the signal from the external alarm source. There are two types; NO (normal open)/NC (normal close).
• When your alarm input device is using external power, please make sure the device and the NVR have the same ground.

GND

Alarm input ground port.

NO1～NO5

Alarm output port 1～5

• 5 groups of alarm output ports. (Group 1：port NO1～C1,Group 2:port NO2～C2,Group 3:port NO3～C3, Group 4：port NO4～C4, Group 5: port NO5, C5, NC5).Output alarm signal to the alarm device. Please make sure there is power to the external alarm device.
• NO: Normal open alarm output port.
• C: Alarm output public end.
• NC: Normal close alarm output port.

C1～C5

NC5

A

RS-485 communication port

RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ.

B

RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ.

CTRL 12V

/

Controller 12V power output. It is to control the on-off alarm relay output. It can be used to control the device alarm output. At the same time, it can also be used as the power input source of some devices such as the alarm detector.

+12V

/

+12V power output port. It can provide the power to some peripheral devices such as the camera or the alarm device. Please note the supplying power shall be below 1A.

Network port

10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable.

eSATA

eSATA port

External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD.

USB2.0 port

USB2.0 port. Connect to mouse, USB storage device, USB burner and etc.

RS-232

RS232 debug COM.

It is for general COM debug to configure IP address or transfer transparent COM data.

HDMI

High Definition Media Interface

High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.3. The two HDMI ports to output video from different video sources.

VGA

VGA video output port

VGA video output port. Output analog video signal. It can connect to the monitor to view analog video.