Difference between revisions of "Software/Dahua Toolbox/VDPConfig/Modify IP"
(Created page with "==How To Modify IP In VDPConfig== ===Description=== This guide will show you how to modify the IP and network information of a device over a local network using VDPConfig for...") |
|||
| Line 16: | Line 16: | ||
[[File:Upgrade_Firmware_-_VDPConfig_-_1.jpg|600px]] | [[File:Upgrade_Firmware_-_VDPConfig_-_1.jpg|600px]] | ||
| + | |||
| + | 2. Discover the device in VDPConfig [[Software/Dahua Toolbox/VDPConfig/Discover Device|How To Discover A Device Using VDPConfig]] | ||
| + | |||
| + | [[File:Modify_IP_-_VDPConfig_-_1.jpg|600px]] | ||
| + | |||
| + | 3. Check the box next to the device in the list | ||
| + | |||
| + | To open network settings: | ||
| + | |||
| + | Click the Pencil icon under the Operate | ||
| + | |||
| + | OR | ||
| + | |||
| + | Click Modify IP towards the bottom of the window | ||
| + | |||
| + | [[File:Modify_IP_-_VDPConfig_-_2.jpg|600px]] | ||
| + | |||
| + | |||
| + | 4. The Modify IP Address window will appear | ||
| + | |||
| + | [[File:Modify_IP_-_VDPConfig_-_3.jpg|600px]] | ||
Revision as of 22:27, 10 June 2019
Contents
How To Modify IP In VDPConfig
Description
This guide will show you how to modify the IP and network information of a device over a local network using VDPConfig for configuration and management.
Prerequisites
- Windows PC.
- Dahua video intercom device on the same LAN as the PC
- Dahua Toolbox
- VDP Config
Step by Step Instructions
1. Open DahuaToolbox and click Open next to VDPConfig
2. Discover the device in VDPConfig How To Discover A Device Using VDPConfig
3. Check the box next to the device in the list
To open network settings:
Click the Pencil icon under the Operate
OR
Click Modify IP towards the bottom of the window
4. The Modify IP Address window will appear
