Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Accessories/Mounts/ITC237 Housing"
(Created page with "=DHI-ITC237-PU1B-IR-LPR= ==Description== ==Accessories installation tips== By default, the insert for wall mount adapter is closed by the rubber cover. Bolt insert will not...") |
(No difference)
|
Revision as of 18:10, 25 February 2020
DHI-ITC237-PU1B-IR-LPR
Description
Accessories installation tips
By default, the insert for wall mount adapter is closed by the rubber cover. Bolt insert will not be visible from outside of camera mounting.
1. Open the camera housing and located it from inside.
2. Push to create a hole from the inside and make sure you get the insert opening enough to place the four bolts from the wall mount (PFB604W).