Difference between revisions of "NVR/Recording Setup/RAID Setup"

Revision as of 23:51, 18 February 2016

How to Setup RAID

Pre-Requisites

• An NVR that supports RAID
• 3 or more hard drives installed on your NVR

Step by Step Instructions to Setup RAID5

1. Login to your NVR from the web interface.

2. Go to Setup->Storage->RAID

Confirm that all installed hard drives are present.

3. Check each of the hard drives you wish to include in the array.

4. Click, "Create Manually"

5. Click, "OK" on the confirmation message, and wait several minutes.

6. Click, "Refresh" and you should see a single listing for the drives you added to the RAID along with a confirmation message.