Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Thermal/Temperature Monitoring/Physical Setup"
| Line 43: | Line 43: | ||
</gallery> | </gallery> | ||
| + | ===Next Step=== | ||
Physical setup is now complete you can continue with setup and programming: | Physical setup is now complete you can continue with setup and programming: | ||
Revision as of 22:04, 23 April 2020
Contents
Temperature Monitoring Solution Physical Setup
Description
This guide will show the proper physical arrangement/setup of the devices for the Temperature Monitoring Solution
Video Instructions
Step by Step Instructions
Mounting Adapter Plates
The mounting brackets/plates must be installed to both the camera and black body device
RQW026-00 Brackets
Black body bracket installation
Thermal camera bracket installation
To attach the tripod:
Use the center hole to screw into tripod
Tripod installed
Suggested Physical Layout
Side view diagram
Top view diagram
Camera height: 2m (6.56 ft)
Black body height: 1.8m (5.9 ft)
Minimum distance between both: 3m (9 ft)
Side view diagram
Top view diagram
JQ-D70Z Black body Setup
Plug in the power and turn on
Allow the device to warm up to 35.0 C
Next Step
Physical setup is now complete you can continue with setup and programming:
If you're using an NVR, follow the steps to set up Thermal Monitoring solution with NVR
If you're using a stand alone Thermal Camera, follow the steps to set up Thermal Monitoring solution with stand alone Thermal camera
