Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Mobile Solution/How To Install SIM Card and SD Card"
(→SIM Card) |
(→SIM Card) |
||
Line 54: | Line 54: | ||
File:Mobile_Recorder_SIM_Card_and_SD_Card_4.jpg|Placing SIM Card | File:Mobile_Recorder_SIM_Card_and_SD_Card_4.jpg|Placing SIM Card | ||
File:Mobile_Recorder_SIM_Card_and_SD_Card_5.jpg|SIM Card in Place | File:Mobile_Recorder_SIM_Card_and_SD_Card_5.jpg|SIM Card in Place | ||
+ | File:Mobile_Recorder_SIM_Card_1.jpg|Reinsert SIM Card Tray | ||
</gallery> | </gallery> | ||
Revision as of 21:33, 22 June 2021
Description
This article will show how to install a SIM Card and SD Card for Mobile Recorder
Prerequisites
- Dahua Mobile Recorder
Make sure the power supply is disconnected. If it is not, the Device automatically shuts down when the door lock switch is opened.
- Screwdriver
- SIM Card or SD Card
Step by Step Instructions
1. Press the left front cover.
The left front cover automatically opens.
2. Insert the key (included with device) and turn to unlock the door
3. Loosen the two screws at the front panel
4. Pull the HDD carrier out along the guide rail
5. SIM Card and SD card slots are shown below
SIM Card
Please make sure the gold part of the SIM card makes contact to the module