Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Access Control/How to Factory Reset DH-ASC2204C-S"
(Created page with "==Description== ==Prerequisites== ==Step by step Instructions==") |
|||
| Line 1: | Line 1: | ||
==Description== | ==Description== | ||
| + | This article will cover the two methods of factory defaulting the DH-ASC2204C-S | ||
| + | |||
| + | 1. Factory defaulting with Configtool (Requires password) | ||
| + | |||
| + | 2. Physical reset method via Dip Switches | ||
==Prerequisites== | ==Prerequisites== | ||
| + | * DH-ASC2204C-S | ||
| + | * Laptop on the same network as DH-ASC2204C-S | ||
==Step by step Instructions== | ==Step by step Instructions== | ||
| + | ===Configtool Method=== | ||
| + | 1. Go to search settings on confitool and enter the current password of the DH-ASC2204C-S, then click on '''OK''' | ||
| + | |||
| + | 2. On the left menu tabs go to '''System Settings''' | ||
| + | |||
| + | 3. Select the DH-ASC2204C-S on the left and click on the ''Restore''' tab above. | ||
| + | |||
| + | 4. Click on '''Factory Default''' | ||
| + | |||
| + | 5. Confirm the reset by clicking on '''OK''' | ||
| + | |||
| + | ===Dip Switches Method=== | ||
Revision as of 20:05, 15 July 2021
Contents
Description
This article will cover the two methods of factory defaulting the DH-ASC2204C-S
1. Factory defaulting with Configtool (Requires password)
2. Physical reset method via Dip Switches
Prerequisites
- DH-ASC2204C-S
- Laptop on the same network as DH-ASC2204C-S
Step by step Instructions
Configtool Method
1. Go to search settings on confitool and enter the current password of the DH-ASC2204C-S, then click on OK
2. On the left menu tabs go to System Settings
3. Select the DH-ASC2204C-S on the left and click on the Restore' tab above.
4. Click on Factory Default
5. Confirm the reset by clicking on OK
