Difference between revisions of "SmartPSS/Menu/Device CFG"

Revision as of 17:34, 6 September 2016 (view source) Nathan (talk | contribs) (→‎Related Links) ← Older edit		Latest revision as of 19:27, 2 October 2024 (view source) AlexS (talk | contribs)
Line 1:		Line 1:
		+	=='''NOTICE'''==
		+	[https://dahuawiki.com/Discontinuation_of_SmartPSS Notice of Discontinuation of SmartPSS]
		+
	==SmartPSS Menu-Device Config==		==SmartPSS Menu-Device Config==
	===Description===		===Description===

---

Latest revision as of 19:27, 2 October 2024

NOTICE

Notice of Discontinuation of SmartPSS

SmartPSS Menu-Device Config

Description

The Device Config menu is used to change the settings on IP cameras and NVR's. Follow the instructions below to learn about device configuration through SmartPSS.

Prerequisites

• SmartPSS Installed on computer
• Connected device such as an IP camera or NVR
• Device added onto SmartPSS successfully

Video Instructions

Step by Step Instructions

1. Launch SmartPSS and on the home page click DEVICE CFG.

2. On the left column click your designated device to configure.

3. Follow Each section below to access the specific Setting:

General

Network

• TCP/IP: Enter this section to configure the systems IPV4 and IPV6 network settings, you can also enable or disable DHCP here.

• Connect: Enter this section to configure the Max connections and

• PPPoE:

• DDNS:

• IP Filter:

• SMTP:

• FTP:

• Multicast:

• Alarm Centre:

Remote Devices

Encode

Image

PTZ Control

Event

Video Detect

Alarm

Abnormality

Storage

Record

HDD

Maintenance

Account

Maintenance

WEB

Related Links

Access Devices on SmartPSS

Setup Remote Access via P2P using SmartPSS

View Devices on SmartPSS

Add devices on SmartPSS using IP

How to locate IP Camera on LAN via SmartPSS

Playback from SmartPSS

How to install SmartPSS