NVR/Install HDD

Revision as of 18:36, 7 December 2015 by Qi (talk | contribs) (→‎How to install HDD)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

How to install HDD

The following HDD installation is based on the following NVR series:

NVR42/42-P/42-8P/72/72-8P/42-4K/42-8P-4K Series

The images came from NVR 72-8P series.

1. Loosen the screws of the upper cover and side panel.

Error creating thumbnail: Unable to save thumbnail to destination

2. Fix four screws in the HDD (Turn just three rounds).

Error creating thumbnail: Unable to save thumbnail to destination

3. Place the HDD in accordance with the four holes in the bottom.

Error creating thumbnail: Unable to save thumbnail to destination

4. Turn the device upside down and then turn the screws in firmly.

Error creating thumbnail: Unable to save thumbnail to destination

5. Fix the HDD firmly.

Error creating thumbnail: Unable to save thumbnail to destination

6. Connect the HDD cable and power cable.

Error creating thumbnail: Unable to save thumbnail to destination

7. Put the cover in accordance with the clip and then place the upper cover back.

Error creating thumbnail: Unable to save thumbnail to destination

8. Secure the screws in the rear panel and the side panel.

Error creating thumbnail: Unable to save thumbnail to destination

Retrieved from "https://DahuaWiki.com/index.php?title=NVR/Install_HDD&oldid=3188"