NVR/Install HDD

Revision as of 20:20, 8 February 2016 by Nathan (talk | contribs) (→‎How to install HDD)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

How to install HDD

The following HDD(Harddrive disk) installation is based on the following NVR series:

NVR42/42-P/42-8P/72/72-8P/42-4K/42-8P-4K Series

The images came from NVR 72-8P series.

1. Loosen the screws of the upper cover and side panel.

Error creating thumbnail: Unable to save thumbnail to destination

2. Fix four screws in the HDD (Turn just three rounds).

Error creating thumbnail: Unable to save thumbnail to destination

3. Place the HDD in accordance with the four holes in the bottom.

Do not drill through the ribbon to the left of the HDD.

Error creating thumbnail: Unable to save thumbnail to destination

4. Turn the device upside down and then turn the screws in firmly.

Error creating thumbnail: Unable to save thumbnail to destination

5. Fix the HDD firmly.

Error creating thumbnail: Unable to save thumbnail to destination

6. Connect the HDD cable and power cable.

Error creating thumbnail: Unable to save thumbnail to destination

7. Put the cover in accordance with the clip and then place the upper cover back.

Error creating thumbnail: Unable to save thumbnail to destination

8. Secure the screws in the rear panel and the side panel.

Error creating thumbnail: Unable to save thumbnail to destination

Retrieved from "https://DahuaWiki.com/index.php?title=NVR/Install_HDD&oldid=5725"

NVR