NVR/Recording Setup/RAID Setup

Revision as of 18:26, 18 December 2015 by JP (talk | contribs)

How to Setup RAID

Pre-Requisites

  • An NVR that supports RAID
  • 3 or more hard drives installed on your NVR

Step by Step Instructions to Setup RAID5

1. Login to your NVR from the web interface.

Error creating thumbnail: Unable to save thumbnail to destination

2. Go to Setup->Storage->RAID

Error creating thumbnail: Unable to save thumbnail to destination

Confirm that all installed hard drives are present.

3. Check each of the hard drives you wish to include in the array.

Error creating thumbnail: Unable to save thumbnail to destination

4. Click, "Create Manually"

Error creating thumbnail: Unable to save thumbnail to destination

5. Click, "OK" on the confirmation message, and wait several minutes.

Error creating thumbnail: Unable to save thumbnail to destination

6. Click, "Refresh" and you should see a single listing for the drives you added to the RAID along with a confirmation message.

Error creating thumbnail: Unable to save thumbnail to destination
Retrieved from "https://DahuaWiki.com/index.php?title=NVR/Recording_Setup/RAID_Setup&oldid=4353"