SmartPSS/How To Use PTZ Preset in SmartPSS

Revision as of 22:17, 2 October 2024 by AlexS (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

NOTICE

Notice of Discontinuation of SmartPSS

How To Use PTZ Preset In SmartPSS

Description

This article will show you how to setup and use PTZ Presets in SmartPSS 2.0

Prerequisites

Video Instructions


Step by Step Instructions

1. Launch SmartPSS.

Preset SmartPSS 1.jpg

2. Click 'Live View'

Preset SmartPSS 2.jpg

3. Double Click the PTZ on the device list on the left side of the screen, then double click the video pane to bring the feed up in full screen

Preset SmartPSS 3.jpg

4. Click 'PTZ'

Preset SmartPSS 4.jpg

5. Click 'More Functions' in the lower portion of the screen

Preset SmartPSS 5.jpg


6. Click the Gear icon

Preset SmartPSS 6.jpg


7. Use the onscreen arrows to move the camera to the desired location for the preset.

Preset SmartPSS 7.jpg


8. Input the preset number you want to program, with a name if desired (not required)

Preset SmartPSS 8.jpg


9. Click the Check icon to save

Preset SmartPSS 9.jpg


10. Use the drop-down menu to select the preset you want to move the camera to

Preset SmartPSS 10.jpg


11. Click the Locate icon to issue the preset movement command

Preset SmartPSS 11.jpg