Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
SmartPSS/EMap Setup
Contents
SmartPSS EMap Setup
Description
This guide will show how to create an EMap using SmartPSS
Prerequisites
- Floor Plan image in JPG format
- SmartPSS Version 2.002.0000009
- Several Devices Added to SmartPSS
Video Instructions
Step by Step Instructions
1. From the Main Page of SmartPSS click Live View
2. In the Device Tree on the left side of the screen, Right Click the Group (by default Default Group)
Select 'New Map"
3. The New Map window will appear
Enter a name for the Map.
Click the folder icon to locate the floor plan image on the computer
Click Open once the floor plan image has been selected
4. Click OK
5. The floor plan image will appear once added
6. Use the Device Tree on the left side of the screen to drag and drop devices on top of the EMap
7. Once a camera has been added you can adjust the viewing angle and direction of the camera
- Field of View
- Rotate camera
8. Continue to add devices as desired
Click the Save icon 
at the top of the screen to Save the EMap
9. Click the Return arrow 
in the top left of the screen to return to Live View
10. The EMap will now appear in the Device List
11. Double click or drag and drop the EMap to an open window to display
12. Click a Camera's icon to open the Video Stream for this device
