Video Intercom/SIP 2.0/Stand Alone VTH and VTO Setup
Contents
Stand Alone VTH and VTO Setup
Description
This guide will show how to setup a VTO and VTH device on a network
This guide will use a VTO2000A and VTH1510
The setup will be similar for
Prerequisites
- VTO and VTH initialized and set up on network
- VTO and VTH log in information
Video Instructions
Step by Step Instructions
VTO Setup
1. Log into the web interface of the VTO by entering the IP
You can find the current IP of the VTO by using VDPConfig from a local computer
Enter the IP into Internet Explorer
2. The Device Initialization will appear if this device has not been initialized
Device Initialization Steps:
3. Log into the device by entering the Username and Password and click Login
4. Click Local Setting
5. Under Basic settings, confirm the information being used.
In this example we will use the default
Villa Call No. = 9901
6. Now the SIP function must be enabled and configured
Click Network Settings
7. Click SIP Server
8. In this example, the VTO device itself will act as the SIP server
To make changes to SIP Server settings, start by unchecking the box next to Enable
The fields can now be edited
- Server Type - VTO
- IP Address - IP Address of VTO device , in this example 192.168.2.163