Template:Alarm Record MobileUI DMSS

NOTICE

Notice of Discontinuation of iDMSS and gDMSS

Prerequisites

• Dahua device that supports Alarm Input recording
• Physical alarm devices wired into Dahua devices - How To Connect A Physical Alarm To A Dahua Device
• iDMSS / gDMSS app
• Device added to iDMSS / gDMSS app

Step by Step Instructions

1. Press Device

2. Select the device in the list

3. Select Remote Configuration

4. Select Alarm Setting

5. Select Local Alarm

6. Select the Alarm Input to configure

7. Toggle to enable the Local Alarm

Toggle the switch next to Advanced Configuration

8. Select Arm/Disarm Period to set the schedule for the alarm input

9. Tap the pencil icon to edit the schedule

10. Use the interface to create

Tap the save icon to save

Tap the arrow to return to the device configuration

11. Select Sensor Type

Select which Alarm Input type is being used: Normally Open (NO) or Normally Closed (NC)

12. Toggle the switch next to Record to enable

Tap Select Channel

Select which channel(s) to record when the alarm input is triggered

Tap the save icon to save

13. Tap the save icon at Local Alarm to save all settings

14. A prompt will appear to confirm