Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.

Thermal/DH-TPC-HT2201/Instructions/Alarm Threshold

Revision as of 22:45, 30 September 2020 by AlexS (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

How to Setup Alarm Threshold

Description

This article covers how to adjust the Temperature Alarm Threshold on a DH-TPC-HT2201

Prerequisites

  • DH-TPC-HT2201

Video Instructions

Step by Step Instructions

1. Open the Main Menu by pressing the Up DH-TPC-HT2201 Up Button.jpg button

DH-TPC-HT2201 FormatSDCard4.PNG

2. Using the Up DH-TPC-HT2201 Up Button.jpg and Down DH-TPC-HT2201 Down Button.jpg buttons, highlight "Temp Monitor".
Then press the power DH-TPC-HT2201 Power Button.jpg button to enter that menu

DH-TPC-HT2201 TempMonitorMode2.PNG

3. Using the Up DH-TPC-HT2201 Up Button.jpg and Down DH-TPC-HT2201 Down Button.jpg buttons, highlight "Alarm Settings".
Then press the power DH-TPC-HT2201 Power Button.jpg button to enter that menu

DH-TPC-HT2201 AlarmThreshold2.PNG

4. The "Alarm Threshold" option should already be highlighted.
Press the power DH-TPC-HT2201 Power Button.jpg button to enter the menu to modify that setting

DH-TPC-HT2201 AlarmThreshold3.PNG

5. The first part of the temperature should already be highlighted on the left.
Press the power DH-TPC-HT2201 Power Button.jpg button to switch to editing mode for that part of the temperature setting

DH-TPC-HT2201 AlarmThreshold4.PNG

6. Using the Up DH-TPC-HT2201 Up Button.jpg and Down DH-TPC-HT2201 Down Button.jpg buttons, adjust the first part of the temperature setting to the desired value.
Press the power DH-TPC-HT2201 Power Button.jpg button to save that value and go to the next part of the temperature setting

DH-TPC-HT2201 AlarmThreshold5.PNG

7. Using the Up DH-TPC-HT2201 Up Button.jpg and Down DH-TPC-HT2201 Down Button.jpg buttons, adjust the second part of the temperature setting to the desired value.
Press the power DH-TPC-HT2201 Power Button.jpg button to save that value

DH-TPC-HT2201 AlarmThreshold6.PNG

8. The "Yes" option should already be highlighted.
Press the power DH-TPC-HT2201 Power Button.jpg button to save the Alarm Threshold as the temperature above

DH-TPC-HT2201 AlarmThreshold7.PNG DH-TPC-HT2201 AlarmThreshold8.PNG

9. Using the Up DH-TPC-HT2201 Up Button.jpg and Down DH-TPC-HT2201 Down Button.jpg buttons, highlight "Snapshot".
Then press the power DH-TPC-HT2201 Power Button.jpg button to enable the Handheld Thermal Device to automatically take a snapshot whenever a temperature is detected above the Alarm Threshold.
It will says "It would reduce time usage!" Press the power DH-TPC-HT2201 Power Button.jpg button to confirm the Snapshot setting

DH-TPC-HT2201 AlarmThreshold9.PNG

10. The Snaphshot setting should show "ON" to the right of it, if the setting was enabled successfully

DH-TPC-HT2201 AlarmThreshold10.PNG

11. Using the Up DH-TPC-HT2201 Up Button.jpg and Down DH-TPC-HT2201 Down Button.jpg buttons, highlight "Buzzer".
Then press the power DH-TPC-HT2201 Power Button.jpg button to enable the device to make an audible beeping noise whenever a temperature is detected above the Alarm Threshold.
It will says "It would reduce time usage!" Press the power DH-TPC-HT2201 Power Button.jpg button to confirm the Snapshot setting

DH-TPC-HT2201 AlarmThreshold11.PNG

12. The Buzzer setting should show "ON" to the right of it, if the setting was enabled successfully

DH-TPC-HT2201 AlarmThreshold12.PNG

Retrieved from "https://DahuaWiki.com/index.php?title=Thermal/DH-TPC-HT2201/Instructions/Alarm_Threshold&oldid=66866"