Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.

Template:DVR Change to HDCVI Analog and IP WebUI New

Revision as of 22:37, 21 October 2020 by Marques.Phillips (talk | contribs) (→‎Step-by-Step Instructions for XVR)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Step-by-Step Instructions for XVR

1. Enter the IP of the device into a browser (default 192.168.1.108)

At the Web Login

Enter the Username and Password

Click Login

2. Click Management

DVR Change to HDCVI Analog and IP - WebUI New - 1.jpg

3. Click Camera

DVR Change to HDCVI Analog and IP - WebUI New - 2.jpg

4. Click Channel Type

DVR Change to HDCVI Analog and IP - WebUI New - 3.jpg

5. Check the box under the IP column next to the Channel to enable IP for

DVR Change to HDCVI Analog and IP - WebUI New - 4.jpg

6. Click Save

DVR Change to HDCVI Analog and IP - WebUI New - 5.jpg

Confirm the prompts that appear by clicking OK

DVR Change to HDCVI Analog and IP - WebUI New - 6.jpg

DVR Change to HDCVI Analog and IP - WebUI New - 7.jpg

The system will reboot

When the unit is back up the IP channels will be enabled

DVR Change to HDCVI Analog and IP - WebUI New - 9.jpg

Retrieved from "https://DahuaWiki.com/index.php?title=Template:DVR_Change_to_HDCVI_Analog_and_IP_WebUI_New&oldid=68605"