NVR/Basic Setup/Connect WiFi Camera

Revision as of 16:37, 11 October 2016 by Qi (talk | contribs)

How to Connect a WiFi Camera to NVR

Description

Prerequisites

Video Instructions

Step by Step Instructions

Note: These instructions only apply for WiFi NVRs and Cameras.

1. Connect the NVR and IP Camera directly to your router or modem with a CAT5 cable.

2. Open the ConfigTool and locate your NVR and IP Camera.

3. Login to both using Internet Explorer.

Error creating thumbnail: Unable to save thumbnail to destination

IP Camera Login

Error creating thumbnail: Unable to save thumbnail to destination

NVR Login

4. On the NVR, go to Settings->Network->WiFi Device Manage

WifiSetup3.png

Be sure to note the SSID and Password.

5. On the IP Camera, go to Setup->Network->WiFi

WifiSetup4.png

6. Locate your NVR's SSID, and click once.

WifiSetup5.png

7. Input your NVR's SSID password, and click, "Connecting"

WifiSetup6.png

8. Go back to the NVR page, go to Settings->Network->WiFi Device Manage

WifiSetup7.png

Confirm that the camera is displaying on this page and note the IP address.

9. On the NVR page, go to Setting->Camera->Remote and click, "Manual Add"

WifiSetup8.png

10. Input the following:

  • Channel: (Any)
  • Manufacturer: Private
  • IP Address: (Your IP Camera's IP Address)
  • TCP Port: 37777
  • User Name: admin
  • Password: (Your IP Camera's password.) Default is, "admin"
  • Remote Channel No. (Any)
  • Decode Buffer: Default
Error creating thumbnail: Unable to save thumbnail to destination

11. Hit, "Save"

Retrieved from "https://DahuaWiki.com/index.php?title=NVR/Basic_Setup/Connect_WiFi_Camera&oldid=16643"