| NVR FAQ
|
| Problem
|
Solution
|
| NVR will not boot.
|
Input power is not correct.
|
| Power connection is not correct.
|
| Power switch button is damaged.
|
| Program upgrade is wrong.
|
| HDD malfunction or something wrong with HDD ribbon.
|
| Seagate DB35.1, DB35.2，SV35 or Maxtor 17-g has compatibility problem. Please upgrade to the latest version to solve this problem.
|
| Front panel error.
|
| Main board is damaged.
|
| NVR often automatically shuts down or stops running.
|
Input voltage is not stable or it is too low.
|
| HDD malfunction or something wrong wit the ribbon.
|
| Button power is not enough.
|
| Front video signal is not stable.
|
| Working environment is too harsh, too much dust.
|
| Hardware malfunction.
|
| System is unable to detect hard drive.
|
HDD is broken.
|
| HDD ribbon is damaged.
|
| HDD cable connection is loose.
|
| Main board SATA port is broken.
|
| Video loss from 1, multiple, or all channels.
|
| Program is not compatible. Please upgrade to the latest version.
|
| Brightness is 0. Please restore factory default setup.
|
| Check your screen saver.
|
| NVR hardware malfunctions.
|
| I can not search local records.
|
| HDD ribbon is damaged.
|
| HDD is broken.
|
| Upgraded program is not compatible.
|
| The recorded file has been overwritten.
|
| Record function has been disabled
|
| Video is distorted when searching local records.
|
| Video quality setup is too low.
|
| Program read error, bit data is too small. There is mosaic in the full screen. Please restart the NVR to solve this problem.
|
| HDD data ribbon error.
|
| HDD malfunction.
|
| NVR hardware malfunctions.
|
| Time display is not correct.
|
| Setup is not correct
|
| Battery contact is not correct or voltage is too low.
|
| Crystal is broken.
|
| NVR can not control PTZ
|
| Front panel PTZ error
|
| PTZ decoder setup, connection or installation is not correct.
|
| Cable connection is not correct.
|
| PTZ setup is not correct.
|
| PTZ decoder and NVR protocol is not compatible.
|
| PTZ decoder and NVR address is not compatible.
|
| When there are several decoders, please add 120 Ohm between the PTZ decoder A/B cables furthest end to delete the reverberation or impedance matching. Otherwise the PTZ control is not stable.
|
| The distance is too far.
|
| Unable to login to WebGUI
|
| For Windows 98 or Windows ME user, please update your system to Windows 2000 sp4. Or you can install client-end software of lower version. Please note right now, our NVR is not compatible with Windows VISTA control.
|
| ActiveX control has been disabled.
|
| No dx8.1 or higher. Please upgrade display card driver.
|
| Network connection error.
|
| Network setup error.
|
| Password or user name is invalid.
|
| Client-end is not compatible with NVR program.
|
| There is only mosaic no video when preview or playback video file remotely.
|
| Network fluency is not good.
|
| Client-end resources are limit.
|
| Current user has no right to monitor.
|
| Network connection is not stable.
|
| IP address conflict.
|
| MAC address conflict.
|
| PC or device network card is not good.
|
| Keyboard can not control NVR.
|
| NVR serial port setup is not correct
|
| Address is not correct
|
| When there are several switchers, power supply is not enough.
|
| Transmission distance is too far.
|
| Alarm signal can not been disarmed.
|
| Alarm setup is not correct.
|
| Alarm output has been open manually.
|
| Input device error or connection is not correct.
|
| Some program versions may have this problem. Please upgrade your system.
|
| Alarm function is null.
|
| Alarm setup is not correct.
|
| Alarm cable connection is not correct.
|
| Alarm input signal is not correct.
|
| There are two loops connect to one alarm device.
|
| Record storage period is not enough.
|
| Camera quality is too low. Lens is dirty. Camera is installed against the light. Camera aperture setup is not correct.
|
| HDD capacity is not enough.
|
| HDD is damaged.
|
| Can not playback the downloaded file.
|
| There is no media player.
|
| No DXB8.1 or higher graphic acceleration software.
|
| There is no DivX503Bundle.exe control when you play the file transformed to AVI via media player.
|
| No DivX503Bundle.exe or ffdshow-2004 1012 .exe in Windows XP OS.
|
| Forgot local menu operation password or network password
|
| Please contact your local service engineer or our sales person for help. We can guide you to solve this problem.
|
| There is no video. The screen is in black.
|
| IPC IP address is not right.
|
| IPC port number is not right.
|
| IPC account (user name/password) is not right.
|
| IPC is offline.
|
| The displayed video is not full in the monitor.
|
| Please cheek current resolution setup. If the current setup is 1920*1080, then you need to set the monitor resolution as 1920*1080
|
| There is no HDMI output.
|
| Displayer is not in HDMI mode.
|
| HDMI cable connection is not right.
|
| The video is not fluent when I view in multiple-channel mode from the client-end.
|
| The network bandwidth is not sufficient. The multiple-channel monitor operation needs at least 100M or higher.
|
| Your PC resources are not sufficient. For 16-ch remote monitor operation, the PC shall have the following environment: Quad Core, 2G or higher memory, independent displayer, display card memory 256M or higher.
|
| I can not connect to the IPC
|
| Please make sure the IPC has booted up.
|
| IPC network connection is right and it is online
|
| IPC IP is in the blacklist.
|
| The device has connected to the too many IPC. It can not transmit the video.
|
| Check the IPC port value and the time zone is the same as the NVR.
|
| Make sure current network environment is stable.
|
| After I set the NVR resolution as 1080P, my monitor can not display.
|
| Shut down the device and then reboot. When you reboot, please press the Fn button at the same time and then release after 5 seconds. You can restore NVR resolution to the default setup.
|
