NVR/Install HDD

How to install HDD

Loosen the screws of the upper cover and side panel. The following HDD installation is based on the following NVR series. NVR42/42-P/42-8P/72/72-8P/42-4K/42-8P-4K Series The images came from NVR 72-8P series.

1. Loosen the screws of the upper cover and side panel.

[file:HDDInstallation1.png]

2. Fix four screws in the HDD (Turn just three rounds). [file:HDDInstallation2.png]

3. Place the HDD in accordance with the four holes in the bottom.

[file:HDDInstallation3.png]

4. Turn the device upside down and then turn the screws in firmly.

[file:HDDInstallation4.png]

5. Fix the HDD firmly.

[file:HDDInstallation5.png]

6. Connect the HDD cable and power cable.

[file:HDDInstallation6.png]

7. Put the cover in accordance with the clip and then place the upper cover back.

[file:HDDInstallation7.png]

8. Secure the screws in the rear panel and the side panel.

[file:HDDInstallation8.png]