Software/Dahua Toolbox/VDPConfig/Modify IP

Revision as of 22:27, 10 June 2019 by Marques.Phillips (talk | contribs)

How To Modify IP In VDPConfig

Description

This guide will show you how to modify the IP and network information of a device over a local network using VDPConfig for configuration and management.

Prerequisites


Step by Step Instructions

1. Open DahuaToolbox and click Open next to VDPConfig


Upgrade Firmware - VDPConfig - 1.jpg

2. Discover the device in VDPConfig - How To Discover A Device Using VDPConfig

Modify IP - VDPConfig - 1.jpg

3. Check the box next to the device in the list

To open network settings:

Click the Pencil icon under the Operate

OR

Click Modify IP towards the bottom of the window

Modify IP - VDPConfig - 2.jpg


4. The Modify IP Address window will appear

Modify IP - VDPConfig - 3.jpg