SmartPSS/How To Setup Video Wall

Revision as of 22:54, 8 April 2019 by Marques.Phillips (talk | contribs) (How To Setup Video Wall In SmartPSS)

How To Setup Video Wall In SmartPSS

Description

This article will show you how to setup a video wall in SmartPSS 2.0

Prerequisites

Video Instructions

Step by Step Instructions

1. Launch SmartPSS.

Preset SmartPSS 1.jpg

2. Click Video Wall

How To Setup Video Wall SmartPSS - 1.jpg

3. The device tree on the left will show all devices added to SmartPSS that are compatible with the Video Wall feature.

How To Setup Video Wall SmartPSS - 2.jpg

4. Click the Video wall layout menu.jpg icon to open the Video Wall Layout Setup menu.

How To Setup Video Wall SmartPSS - 3.jpg

Click the + to create a new layout

The Video Wall Layout Setup menu is where you can define the physical layout of the monitor outputs per device

How To Setup Video Wall SmartPSS - 5.jpg

5. Use the menu buttons below the grid to create the Video Wall Layout.

Start by clicking one of the layout options in the bottom left of the screen (1, 2x2, 3x3, etc.).


How To Setup Video Wall SmartPSS - 7.jpg

Click again in the grid to place the grid.

You can also use the menu on the right to combine or splice screens.

Click Next

7. A device tree will appear on the left.

How To Setup Video Wall SmartPSS - 7.5 .jpg

Drag and drop from the device tree to the grid layout to configure the arrangement for the corresponding monitor outputs for the device

How To Setup Video Wall SmartPSS - 7.6.jpg

6. Click Finish once the Video Layout has been created

How To Setup Video Wall SmartPSS - 8.jpg

In this example, a decoder with 4 Monitor Outputs has been arranged in a 2X2 Layout

7. Use the device tree on the left to drag and drop streams into the Video Wall Layout

How To Setup Video Wall SmartPSS - 9.jpg

Click inside a quadrant and click from one of the layout options to change to one of the available options - 1 , 2X2, 3X3, 4X4

8. The Windows Detail window allows you to change settings for each of the windows - such as Stream Type and Stay Time

How To Setup Video Wall SmartPSS - 10.jpg

9. Once the layout has been configured Click the Save icon Save icon.jpg

How To Setup Video Wall SmartPSS - 11.jpg

10. Enter a name for the Plan then Click Save

How To Setup Video Wall SmartPSS - 12.jpg


11. All created Plans will appear in the Plan submenu, click the Notepad icon.jpg icon to view and switch between created Layout Plans.


How To Setup Video Wall SmartPSS - 13.jpg

12. Click Schedule Control Config on the right side of the screen to configure a Scheduled Tour of created Video Wall Layouts

How To Setup Video Wall SmartPSS - 14.jpg

13. Use the Scheme Configuration menu to program the tour

How To Setup Video Wall SmartPSS - 15.jpg

Enter a dwell time (in seconds) Select the created Layout Scheme Then Click Add Plan

14. Click Save once the Scheme has been configured

How To Setup Video Wall SmartPSS - 16.jpg

15. To begin a created scheme click the Start scheme patrol icon.jpg icon on the right side of the screen

How To Setup Video Wall SmartPSS - 17.jpg


16. The scheme patrol will begin. To stop click the button in the center of the screen

How To Setup Video Wall SmartPSS - 18.jpg