Access Control/Products/ASI1212D

Revision as of 22:35, 26 November 2019 by Marques.Phillips (talk | contribs)

ASI1212D

ASI1212D.png

float

float

System Structure

Notice

Default IP address for this device is 192.168.1.108

User name: admin

Password: 888888888

or

User name: admin

Password: admin

Firmware Download

Click here to download

Features

  • Wiegand or RS-485 Interface to Reder
  • TCP/IP to PC, Support for WAN Communication
  • Touch Keyboard and LCD display
  • Supports 30,000 Valid Cards and 150,000 Events
  • Supports Card, Password, Fingerprint and a Combination of Credentials
  • Add Devices in SmartPSS via P2P Connection
  • Door Time Out, Intrusion, Duress and Tamper Alarms
  • Anti-passback and Multi-card Open Options
  • Supports 128 Efficient Time and Holiday Schedules

Wiring Guide

This guide demonstrates wiring the 'Ring' function. A light is in place to show when the relay has been successfully triggered

Please reference the device Wiring Guide for the correct relay connections for your purposes

1. Check the wiring diagram to confirm what connections need to be made

For Ring function:

ASI1212DRing.jpg

The Red and Black wires labeled CON3 are used

2. Wire the connections in line with the desired devices (and power if required) to complete a circuit.

In this example a light (and external power) is being used to show when the relay has been successfully triggered.

ASI1212D Wiring.jpg

3. After wiring the circuit press the Ring button and the relay should engage

In this example, the light will turn on

ASI1212D Wiring 2.jpg


ASI1212D Wiring Chart

Asa1212wiringout.jpg

Asa1212wiringchart1.jpg

Asa1212wiringchart2.jpg


Specifications

System  
Main Processor 32-bit
Flash Memory 32 MB
Input/Output Ports  
Inputs One (1) Door Sensor
  One (1) Exit Button
  One (1) Alarm
Outputs Three (3) Alarm Relays (Door Lock, Bell, Alarm)
Card Reader  
Format 13.56 MHz MIFARE
Range 3 cm to 8 cm (1.18 in. to 3.15 in.), maximum
Response Time < 0.1 s
Fingerprint Reader  
Response Time ≤ 0.5 s
Recognition Time ≤ 1.5 s
FAR ≤ 0.00004%
FRR ≤ 0.15%
Capacity  
Card Holders 30,000
Events 150,000
Fingerprints 3000
Functions  
Network P2P, DHCP
Access Control Anti Pass-back, Multi-interlock, Multi-card Unlock
User Management General, VIP, Guest, Patrol, Black List, Duress
Alarm Functions Door time-out, Intrusion, Duress,Tamper
Schedule Settings Schedule: 128 Groups
  Period: 128 Groups
  Holiday: 128 Groups
RTC Supported
Voice Prompt Supported
Audible Indicator Buzzer
Interface  
To PC RJ45 (10/100 Mbps)
To Reader Wiegand 34/26, RS485
Certifications  
Safety EN 60950:2006+A2:2013
  Conforms to UL Standards
Electromagnetic Compatibility (EMC) FCC CFR 47 Part 15 subpart B
  EN 55022:2010/AC:2011 (Class B)
  EN 55024:2010, EN 50130-4:2011,
  EN 61000-6-3:2007/A1:2011
  EN 61000-3-2:2006+A1:2009+A2:2009
  EN 61000-3-3:2013,
  IEC 61000-4-2:2008, IEC 61000-4-3:2006+A1:2007
  IEC 61000-4-4:2012, IEC 61000-4-5:2005,
  IEC 61000-4-6:2008, IEC 61000-4-8:2009
  IEC 61000-4-11:2004
Electrical/Environmental  
Power Supply 9 to 15 VDC, 200 mA
Operating Temperature -5° C to +55° C (23° F to +131° F), 95% RH
Ingress Protection IP65
Construction  
Dimensions 205.0 mm x 83.0 mm x 33.0 mm
  (8.07 in. x 3.26 in. x 1.30 in.)
Net Weight 0.44 kg (0.97 lb)
Accessory - IC Card  
Model Number MF11CS50
Standard MIFARE S50, 13.56 MHz
Compatibility ISO/IEC 14443A
Range Approximately 10 cm (3.94 in.)
Dimensions 86.0 mm x 54.0 mm x 0.80 mm
  (3.39 in. x 2.13 in. x 0.03 in.)
Weight 0.006 kg (0.013 lb)
Manufacturer/Brand Dahua

Asa1212wiringout.jpg

Asa1212wiringchart1.jpg

Asa1212wiringchart2.jpg