PTZ/Instructions/Pan
Pan
Instructions
NOTE
Please Note: PTZ Pan is currently not available on the following interface:
- Mobile: iDMSS/gDMSS
SystemUI Old
How to Setup Pan via Old SystemUI
Prerequisites
- Dahua recorder
- VGA or HDMI monitor
Video Instructions
Step by Step Instructions
1. Click on PTZ to bring out PTZ menu.
2. Click on the right arrow to expand the function list.
3. Click "AutoPan" to start the horizontal pan function, and press the same button again to stop.
SystemUI New
How to Setup Pan via New SystemUI
Prerequisites
- Dahua recorder
- VGA or HDMI monitor
Video Instructions
Step by Step Instructions
1. Click on PTZ to bring out PTZ menu.
2. Click on the right arrow to expand the function list.
3. Click "AutoPan" to start the horizontal pan function, and press the same button again to stop.
WebUI Old
How to Setup Pan
Prerequisites
- Dahua Network PTZ
- IP Address of Network PTZ
- Internet Explorer
Video Instructions
Step by Step Instructions
1. Login to your IP Camera via Internet Explorer.
2. On the right hand side click, "PTZ Settings" and make sure, "Pan" is selected in the drop down menu.
3. Click, "Start"
WebUI New
How to Setup Pan via New WebUI
Prerequisites
- Internet Explorer
Video Instructions
Step by Step Instructions
1. Select "Live View".
2. Expand the function list and choose "Pan".
3. Press "Start" to start the pan action and press "Stop" to stop the pan action.
SmartPSS
How to Setup Pan via SmartPSS
Prerequisites
- Dahua Network PTZ
video Instructions
Step by Step Instructions
1. After opening SmartPSS, select "Live View".
2. Locate the camera from the list, drag and drop it into one of the camera grids.
3. Expand the list "More Functions" and select "Pan".
4. Press the "Start" button to start the pan and press it again to stop.
DSS Express S
How to Setup Pan via DSS Express S
Prerequisites
- DSS Express S installed on the computer
Video Instructions
Step by Step Instructions
1. Open "Live View", drag/drop the camera to the grid, and click on the up arrow towards the bottom to bring up the PTZ menu.
2. Expand the function list by clicking on the 3 dots icon.
3. Click "Start rotate" to initiate the pan action, press again to stop the pan action.
